Home
Class 12
PHYSICS
A capacitor of 10 muF and an inductor of...

A capacitor of `10 muF` and an inductor of 1 H are joined in series. An ac of 50 Hz is applied to this combination. What is the impedance of the combination?

Text Solution

AI Generated Solution

To find the impedance of a series combination of a capacitor and an inductor in an AC circuit, we can follow these steps: ### Step 1: Identify the given values - Capacitance, \( C = 10 \, \mu F = 10 \times 10^{-6} \, F \) - Inductance, \( L = 1 \, H \) - Frequency, \( f = 50 \, Hz \) ### Step 2: Calculate the angular frequency (\( \omega \)) ...
Promotional Banner

Similar Questions

Explore conceptually related problems

A capacitor of 10 (mu)F and an inductor of 1 H are joined in series. An ac of 50 Hz is applied to this combination. What is the impedance of the combination?

A resistance of 40 ohms and an inductance of 95.5 millihenry are connected in series in a 50 cycle/sec AC circuit. The impedence of this combination is very nearly

A circuit is set up by connecting L=100mH, C =5muF and R =100Omega in series. An alternating emf of 150√2 )V,(500)/(pi) Hz is applied across this series combination.Calculate the impedance of the circuit. What is the average power dissipated in the resistor

A 10 mu F capacitor is conneted with 1 henry inductance in series with a 50 hertz source of a.c. Calculate the impedance of the combination.

An inductance L , a capacitor of 20mu F and a resistor of 10Omega are connected in series with an AC source of frequency 50 Hz . If the current is in phase with the voltage, then the inductance of the inductor is

A capacitor, a resistor and a 40 mH inductor are connected in series to an a.c. source of frequency 60 Hz. Calculate the capacitance of the capacitor,if current is in phase with the voltage.

Which of the following plots may represent is impedence of a series LCR combination?

Three capacitors each of capacitance 9 pF are connected in series. (a) What is the total capacitance of the combination ? (b) What is the potential difference across each capacitor if the combination is connected to a 120V supply.

Three capacitors of 2 muF, 3 muF and 6 muF are joined in series and the combination is charged by means of a 24 volt battery. The potential difference between the plates of the 6 muF capacitor is

A 10 muF capacitor and a 20 muF capacitor are connected in series across a 200 V supply line. The chraged capacitors are then disconnected from the line and reconnected with their positive plates together and negative plates together and no external voltage is applied. what is the potential difference across each capacitor ?