Home
Class 12
CHEMISTRY
Assume that impure copper contains only ...

Assume that impure copper contains only iron, silver and a gold as impurities. After passage of `140A`, for `482.5` sec, of the mass of the anode decreased by `22.260g` and the cathode increased in mass by `22.011g`. Estimate the % iron and % copper originally present.

Text Solution

Verified by Experts

The correct Answer is:
98.88%, 0.88%
Promotional Banner

Similar Questions

Explore conceptually related problems

A sample of impure cuprous oxide contains 66.67% copper, by ,mass. What is the percentage of pure Cu_2 O in the sample? (Cu=63.5)

A complex of iron contains 45.6% iron by mass. Calculate the number of iron atoms present in 15.0 g of this complex.

In 1894 , Lord Rayleigh reported that the mass of chemically prepared nitrogen was different from that of nitrogen extracted from the atmosphere, as shown in Tables 1 and 2 . Latter, this difference was attributed to the presence of argon in atmospheric nitrogen. The masses of gases were mearsured by using a glass vessel with a known volume under atmospheric pressure (1.013xx10^(5)Pa) . |{:("From nitric oxide",,2.3001 g),("From nitrous oxide",,2.2990 g),("From amonium nitrite purified at a red heat",,2.2987 g),("From urea",,2.2985 g),("From ammonium nitrite purified in the cold",,2.2987 g),("Mean",,2.2990 g):}| |{:(O_(2) "was removed by hot copper" (1892),,2.3103 g),(O_(2) "was removed by hot iron" (1893),,2.3100 g),(O_(2) "was removed by ferrous hydrate (1894),2.3102 g,),(Mean,,2.3102 g):}| Ramsay and cleve discovered helium in cleveite (a mineral consiting of uranium oxide and oxides of lead, thorium, and rare earths, an impure variety of uraninite) independently and virtually simultaneously in 1895 . The gas extracted from the rock showed a unique spectroscopic line at around 588 nm (indicated by D3 in Figure 1 ), which was fist observed in the spectrum of solar prominence during a total eclipse in 1868 , near the well-known D_(1) and D_(2) lines of sodium. ul("Which") equation explains the occurrence of helium in cleveite among [A] to [D] below? Mark one.

In 1894 , Lord Rayleigh reported that the mass of chemically prepared nitrogen was different from that of nitrogen extracted from the atmosphere, as shown in Tables 1 and 2 . Latter, this difference was attributed to the presence of argon in atmospheric nitrogen. The masses of gases were mearsured by using a glass vessel with a known volume under atmospheric pressure (1.013xx10^(5)Pa) . |{:("From nitric oxide",,2.3001 g),("From nitrous oxide",,2.2990 g),("From amonium nitrite purified at a red heat",,2.2987 g),("From urea",,2.2985 g),("From ammonium nitrite purified in the cold",,2.2987 g),("Mean",,2.2990 g):}| |{:(O_(2) "was removed by hot copper" (1892),,2.3103 g),(O_(2) "was removed by hot iron" (1893),,2.3100 g),(O_(2) "was removed by ferrous hydrate (1894),2.3102 g,),(Mean,,2.3102 g):}| Ramsay and cleve discovered helium in cleveite (a mineral consiting of uranium oxide and oxides of lead, thorium, and rare earths, an impure variety of uraninite) independently and virtually simultaneously in 1895 . The gas extracted from the rock showed a unique spectroscopic line at around 588 nm (indicated by D3 in Figure 1 ), which was fist observed in the spectrum of solar prominence during a total eclipse in 1868 , near the well-known D_(1) and D_(2) lines of sodium. ul("Identify") the transition relevant to the D_(3) line of helium among the transitions [A] to [E] indicated in Figure 2. Mark one of the following: [A] [B] [C] [D] [E]

An alloy of gold and silver contains 38.5% silver by mass and has a density of 14.6 g.mL^(-1) . What is the molar concentration of silver in this alloy :

12. g of an impure sample of arsenious oxide was dissolved in water containing 7.5 g of sodium bicarbonate and the resulting solution was diluted to 250 mL . 25 mL of this solution was completely oxidised by 22.4 mL of a solution of iodine. 25 mL of this iodine solution reacted with same volume of a solution containing 24.8 g of sodium thiosulphate (Na_(2)S_(2)O_(3).5H_(2)O) in one litre. Calculate teh percentage of arsenious oxide in the sample ( Atomic mass of As=74 )

A" " 5.0 g sample of felspar containing Na_(2)O,K_(2)O and some inert impurity is dissolved in dilute HCl solution and NaCl and KCl formed are separated by fractional crystallization. During crystallization some less soluble impurities also come out. Mass of NaCl, KCl and impurity accompanying these salts was found to be 6.47 g . Solid crystal was then re-dissolved and required 300mL of 0.3M AgNO_(3) for complete precipitation of chlorides. The precipitate this, obtained ws found to contain 4.23% insoluble impurity. Determine mass percentage of Na_(2)O and K_(2)O in the original sample:

A silver coulometer is in series with a cell electrolyzing water. In a time of 1 minute at a constant current 1.08 g silver get deposited on the cathode of the coulometer. What total volume (in mL at 1atm, 273K) of the gases would have produced in other cell. In this cell that the anodic and cathodic efficiencies were 90% and 80% respectively. Assume the gases collected are dry. (Ag = 108) (molar volume of any ideal gas at 1atm and 273K = 22.4L)

0.10 g of a sample containing CuCO_(3) and some inert impurity was dissolved in dilute sulphuric acid and volume made up to 520 mL. This solution was added into 50mL of 0.04 M KI solution where copper precipitates as Cul and I^(-) is oxidized into I_(3)^(-) . A 10 mL portion of this solution is taken for analysis, filtered and made up free I_(3)^(-) and then treated with excess of acidic permanganate solution. Liberated iodine required 20 mL of 2.5 mM sodium thiosulphate solution to reach the end point. Determine mass percentage of CuCO_(3) in the original sample.

0.10g of a sample conining CuCo_3 and some inert impurity was dissolved in dilute sulphuric acid and volume made up to 50mL . This solution was added into 50mL of 0.04MKI solution where copper precipitates as CuI and I^- is oxidized into I_3^- . A 10mL portion of this solution is taken for analysis, filtered and made up free I_3^- and then treated with excess of acidic permanganate solution. Liberated iodine required 20mL of 2.5mM sodium thiosulphate solution to reach the end point . Determine mass percentage of CuCO_3 in the original sample.