Home
Class 12
PHYSICS
If R1 and R2 are respectively the filame...

If `R_1 and R_2` are respectively the filament resistances of a 200 W bulb and a 100 W bulb designed to operate on the same voltage, then

A

`R_1 = 2R_2`

B

`R_2 =2R_1`

C

`R_2 = 4R_1`

D

`R_1 = 4 R_2`

Text Solution

Verified by Experts

Promotional Banner

Topper's Solved these Questions

  • TEXTUAL QUESTIONS

    MODERN PUBLICATION|Exercise EXERCISE|507 Videos
  • STRUCTURE OF NUCLEUS

    MODERN PUBLICATION|Exercise EXERCISE|47 Videos
  • TEXUAL QUESTIONS

    MODERN PUBLICATION|Exercise EXERCISE|195 Videos
MODERN PUBLICATION-TEXTUAL QUESTIONS-EXERCISE
  1. In an ordinary electric heater, if the length of the coil is reduced t...

    Text Solution

    |

  2. A 500 W heating unit is designed to operate from a 115 V line. If the ...

    Text Solution

    |

  3. If R1 and R2 are respectively the filament resistances of a 200 W bulb...

    Text Solution

    |

  4. Of the two bulbs in ahouse, one glows brighter than the other. Which ...

    Text Solution

    |

  5. The product of volt and coulomb is joule. (ii) The produce of volt and...

    Text Solution

    |

  6. Two heating coils, one of fine wire and the other of thick wire of the...

    Text Solution

    |

  7. Household electrical appliances are not usually connected in series, b...

    Text Solution

    |

  8. 40 electric bulb are connected in series across a 220 V supply. After ...

    Text Solution

    |

  9. Two resistance r1 and r2 (r1< r2) are joined in parallel. The equialen...

    Text Solution

    |

  10. A metal wire of resistance R is cut into three equal pieces that are t...

    Text Solution

    |

  11. n equal resistors are first connected in series and then connected in ...

    Text Solution

    |

  12. n conductors, each of resistance r, when connected in parallel, give a...

    Text Solution

    |

  13. When an unknown resistance and a resistance of 4Omega are connected in...

    Text Solution

    |

  14. Four resistance R1,R2,R3 and R4 are connected in parallel. The resulta...

    Text Solution

    |

  15. Resistance of 6 ohm each are connected in the manner shown in the give...

    Text Solution

    |

  16. Three resistors of 4 ohms, 6 ohms, and 12 ohms are connected in parall...

    Text Solution

    |

  17. A primary cell has an e.m.f. 1.5 volt. When short circuited, it gives ...

    Text Solution

    |

  18. A cell supplies a current of 0.3 A through a resistance of 7 ohm and a...

    Text Solution

    |

  19. Two cells X and Y are connected to a resistance of 10Ω as shown in the...

    Text Solution

    |

  20. n cells of e.m.f E and internal resistance r are connected in series...

    Text Solution

    |