Home
Class 14
MATHS
A steel rod of length 20 3/26 is cut dow...

A steel rod of length `20 3/26` is cut down from a rod of length `56 1/5` what when is the remaining length of the rod?

A

`36 3/130`

B

`36 7/130`

C

`36 11/130`

D

`36 1/130`

Text Solution

AI Generated Solution

Promotional Banner

Similar Questions

Explore conceptually related problems

A steel rod of length 20 3/26 is cut out from a rod of length 56 1/5 . What then is the remaining length of the rod?

15 small rods, each of length 23 2/7 m are joined to make a big rod. What then is the length of the big rod?

A brass rod length 50 cm and diamteer 3.0 mm is joined to a steel rod of the same length and diameter. What is the change in length of the combined rod at 250^(@)C if the original length are at 40^(@)C ? Coefficient of linear expansion of brass and steel are 2.10xx10^(-5) .^@C^(-1) and 1.2 xx 10^(-5) ^(@)C^(-1) respectively.

A composite rod consists of a steel rod of length 25 cm and area 2A and a copper rod of length 50 cm and area A . The composite rod is subjected to an axial load F . If the Young's moduli of steel and copper are in the ratio 2: 1 then

The length of a rod is (11.05+-0.05)cm . What is the length of two such rods?

A brass rod of length 50 cm and diameter 3.0 cm is joined to a steel rod of the same length and diameter. What is the change in length of the combined rod at 250^(@)C , if the original length are at 40.0^(@)C ? (Coefficient of linear expansion of brass =2.0 xx 10^(-5)//^(@)C, steel = 1.2 xx 10^(-5)//^(@)C

The y co - ordinate of the centre of mass of the system of three rods of length 2a and two rods of length a as shown in the figure is (Assume all rods to be of uniform density)

Calculate the potential due to a thin charged rod of length L at the points along and perpendicular to the length. Charge per unit length on the rod is lambda .

Find the thermal resistance of an aluminium rod of length 20cm and area of cross section 1cm^(2) . The heat current is along the length of the rod. Thermal conductivity of aluminium =200Wm^(-1)K^(-1) .

Ratio of energy density of two steel rods is 1 : 4 when same mass is suspended from the rods. If length of both rods is same then ratio of diameter of rods will be.