Home
Class 12
PHYSICS
Calculate the value of stress on a wire ...

Calculate the value of stress on a wire of steel having radius of 2 mm, when 10 kN of force is applied on it.

A

`9.96xx10^2N//m^2`

B

`7.96xx10^2N//m^2`

C

`6.5xx10^7N//m^2`

D

`8.96xx10^7N//m`

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Similar Questions

Explore conceptually related problems

The stress in a wire of diameter 2 mm, if a load of 100 g is applied to a wire, is

Consider a rod of steel having radius of 8 mm and the length of 2 m. If a force of 150 kN stretches it along its lengths , then calculated the stress, percentage strain in the rod if the elongation in length is 7.46 mm.

Consider a rod stell having radius of 8 mm and the length of 2 m. If a force of 150 kN stretches it along its length, then calculate the stress and strain in the rod, if the elongation in length is 7.46 mm.

Two steel wires have equal volumes. Their diameters are in the ratio 2:1 . When the same force is applied on them, the elongation produced will be in the ratio of

A steel wire has a length of 12 m and a mass of 2.10 kg. What will be the speed of a transverse wave on this wire when a tension of 2.06 xx 10^(4) N is applied ?

As shown in figure, by combining together copper and steel wires of same length and same diameter, a force F is applied at one of their end. The combined length is increased by 2 cm. The wires will have

A copper wire and a steel wire of the same diameter and length are joined end and a force is applied which stretches their combined length by 1 cm. Then, the two wires will have

The length of a wire is increased by 1 mm due to applied load. The wire of the same material have lengths and radius half that of the first wire, by the application of the same force, then extension produced will be

A cylindrical steel wire of 3 m length is to stretch no more than 0.2 cm When a tensile force of 400 N is applied to each end of the wire ? What minimum diameter is required for the wire ?? Y_(steel) = 2.1xx10^(11) N//m^2

Calculate the force required to prevent a steel wire of 1 mm^2 cross-section from contracting when it cools from 60^@C to 15^@C , if Young's modulus for steel is 2xx10^11 Nm^-2 and its coefficient of linear expansion is 0.000011^@C^-1.