Home
Class 12
PHYSICS
A winding wire which is used to prepare ...

A winding wire which is used to prepare a solenoid of length 80 cm can bear a maximum cuurent of 10 A. the cross-sectional radius of the solenoid is 3 cm. what should be the length of the winding wire if a magnetiic field of 0.2 T is to be produced at the centre of the solenoid along its axis?

A

`1.2xx10^2m`

B

`4.8xx10^2m`

C

`2.4xx10^3m`

D

`6xx10^3m`

Text Solution

Verified by Experts

The correct Answer is:
C
Promotional Banner

Similar Questions

Explore conceptually related problems

A solenoid of length 20cm and radius 2cm is closely wound with 200 turns. The magnetic field intensity at either end of the solenoid when the current in the winding is 5 amp . Is

A long solenoid of 50 cm length having 100 turns carries a current of 2.5A. The magnetic field at centre of solenoid is:

A straight solenoid of length 50 cm has 1000 turns per metre and mean cross-sectional area of 2 xx 10^(-4) m^(2) . It is placed with its axis of 30^(@) with uniform magnetic field of 0.32 T . Find the torque acting on the solenoid when a current of 2 ampere is passed through it .

The length of a thin wire required to manufacture a solenoid of length l = 100 cm and inductance L = 1 mH , if the solenoid's cross-sectional diameter is considerably less than its length is

A solenoid has 20 turns per cm. What is the value of the current that should be passed through the solenoid, to produce a magnetic field of 4 mT at its center?

A copper wire having a resistance of 0*02Omega per metre is used to wind a 500 turns solenoid of radius 2*0cm and length 30cm . What should be the emf of the battery which when connected across the solenoid would produce a magnetic field at 10^-2T , near the centre of the solenoid.

An air-solenoid has 500 turns of wire in its 40 cm length. If the current in the wire be 1.0 ampere then the magnetic field on the axis inside the solenoid is -