Home
Class 12
PHYSICS
A full wave rectifier consists of two id...

A full wave rectifier consists of two identical junction diodes having negligible forward resistance When a sinusoidal voltage supply of peak value 100 V is fed to the rectifier, the RMS value of the voltage at its output will be:

A

`100 V `

B

`100sqrt(2)`

C

`70.7 V `

D

`100//(2sqrt(2))`

Text Solution

Verified by Experts

Promotional Banner

Similar Questions

Explore conceptually related problems

In a common emitter amplifier, using output reisistance of 5000 ohm and input resistance fo 2000ohm, if the peak value of input signal voltage is 10 m V and beta=50, then the peak value of output voltage ?

A crystal diode having internal resistance 200Omega is used as a half rectifier. If the applied voltage is V=50 sin omegat volt and load resistance is 800Omega , find maximum output current

The variation with time t of the output E of an alternating voltage supply of frequency 50 Hz is shown in the figure. State the time t_1 , the peak value E_0 of the voltage, the root mean square voltage E_(rms) , the mean (Average) voltage E_(av)

The amplifiers X, Y and Z are connected in series. If the voltage gains of X, Y and Z are 10, 20 and 30, respectively and the input signal is 1 mV peak value, then what is the output signal voltage (peak value) if d.c. supply voltage is 5V?

The amplifiers X, Y and Z are connected in series. If the voltage gains of X, Y and Z are 10, 20 and 30, respectively and the input signal is 1 mV peak value, then what is the output signal voltage (peak value) if d.c. supply voltage is 10V?

The peak voltage of an ac supply is 300 V. The rms value of current in an ac circuit is 10 A. What is the peak current?

Four identical cells each of emf 2V, are joined in parallel providing supply of current to external circuit consisting of two 15 Omega resistors joined in parallel. The terminal voltage of the cells ae read by an ideal voltmeter is 1.6V. Calculate the internal resistance of each cell.

Four identical cells each of emf 2V, are joined in parallel providing supply of current to external circuit consisting of two 5 Omega resistors joined in parallel. The terminal voltage of the cells ae read by an ideal voltmeter is 1.6V. Calculate the internal resistance of each cell.

An ideal transformer has 5,000 turns on its primary coil . It is to be used to convert a mains supply of 230 V.to an alternating voltage having a peak value of 9.0 V. Calculate the number of turns on the secondary coil.

In a p-n junction diode, the current I can be expressed as I = I_0 exp ((eV)/(2k_BT)) where I_0 is called the reverse saturation current, V is the voltage across the diode and is positive for forward bias and negative for reverse bias, and I is the current through the diode, k_B is th Boltzmann constant (8.6xx 10^-5 (eV)/K) and T is the absolute temperature. If for a given diode I_0 = 5 xx 10^-12 A and T = 300 K, then - What is the dynamic resistance when the voltage is increased to 0.7 V from 0.6 V?