Home
Class 11
PHYSICS
1cm of main scale of a verier calliper i...

`1cm` of main scale of a verier calliper is divided into 10 divisions. The least count of the callipers is `0.05cm` thenthe verier scale must have

A

10 divisions

B

20 divisions

C

25 divisions

D

50 divisions

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Similar Questions

Explore conceptually related problems

1 cm of main scale of a vernier callipers is divided into 10 divisions. The least count of the callipers is 0.005 cm , then the vernier scale must have.

1 cm of main scale of a vernier callipers is divided into 10 divisions. The least count of the callipers is 0.005 cm , then the vernier scale must have.

The least count of a vernier callipers is 0.01 cm. Then, the error in the measurement is

1 cm on the main scale of a vernier callipers is divided into 10 equal parts. If 10 divisions of vernier coincide with 8 small divisions of main scale, then the least count of the calliper is.

1 cm on the main scale of a vernier calipers is divided into 10 equal parts. If 10 divisions of vernier coincide with 8 small divisions of main scale, then the least count of the caliper is.

A vernier callipers has 20 divisions on the vernier scale which coincide with 19 divisions on the main scale. The least count of the instrument is 0.1 mm. The main scale divisions are of

The least count of the main scale of vernier callipers is 1 mm. Its vernier scale is divided into 10 divisions and coincide with 9 division of the main scale. When jaws are touching each other, the 7^(th) division of main scale and zero of main scale. When this vernier is used to measure lenght of a cylinder the zero of the vernier scales between 3.1 cm and 3.2 cm and 4^(th) VSD coincider with a main scale division . The lehgth of the cylinder is : (VSD is vernier scale division)

The length of a strip measured with a meter rod is 10.0 cm . Its width measured with a vernier callipers is 1.00 cm . The least count of the meter rod is 0.1 cm and that of vernier callipers is 0.01 cm . What will be the error in its area?

The main scale of a vernier calipers reads 10 mm in 10 divisions. Ten divisions of vernier scale coincide with nine divisions of the main scale. When the two jaws of the calipers touch each other, the fifth division of the vernier coincides with 9 main scale divisions and zero of the vernier is to the right of zero of main scale, when a cylinder is tighty placed between the two jaws, the zero of the vernier scale lies slighty to the left of 3.2 cm and the fourth vernier division coincides with a main scale division. Find diameter of the cylinder.

One cm on the main scale of vernier callipers is divided into ten equal parts. If 20 division of vernier scale coincide with 8 small divisions of the main scale. What will be the least count of callipers ?