Home
Class 11
PHYSICS
An empty glass bottle is fitted with a n...

An empty glass bottle is fitted with a narrow tube at its mouth. The open end of the tube is kept in a beaker containing water. When the bottle is heated, bubbles of air are seen escaping into the water. Explain the reason.

A

`1:2`

B

`1:4`

C

`1:5`

D

`2:5`

Text Solution

Verified by Experts

The correct Answer is:
D
Promotional Banner

Similar Questions

Explore conceptually related problems

A porpous cup is filled with H_(2) gas at the atmospheric pressure and is connected to a thin glass tube a vertical position. The second end of the tube is immersed in water below it. After some time, water rises in the glass tube. Explain giving reasons.

A capillary tube is dipped in water to a depth and the water rises to a height h( lt l) in the capillary tube. The lower end of the tube is closed in water by putting a lower over it. The tube is now taken out and the thumb is removed from the lower end and it kept open. The length of liquid column in the tube will be

If you are provided with two tubes (A and B), where one is narrow and the other is relatively wider and if both are immersed in a beaker containing water as shown in the figure. Why does B show higher water rise than A ?

When air is blown from mouth into a test - tube containing lime water, the lime water turned milky due to the presence of

A narrow capillary tube when dipped in beaker containing water, the rise is 20 cm . If the area of cross section of the bore is reduced to (1//4)^(th) calue , water will rise to a height of

A tuning fork vibrating with a frequency of 500 Hz is kept close to the open end of a tube filled with water, as shown in figure. The water level in the tube is gradually lowered When the water level is 17 cm below the open to open end, maximum intensity of sound is heard. If the room temperature is 20^(@) C, the speed of sound in air at the temperature is

A vertical glass capillary tube, open at both ends, contains some water. Which of the following shapes may not be taken by the water -in the tube?

A capillary tube is dipped in water vertically. It is long enough for the water to rise to the maximum height h in the tube. The length of portion immersed in water is I lt h . The lower end of the tube is closed and then the tube is taken out and opened again. Will all the water flow out of tube? Explain.

A glass tube 1.5 m long and open at both ends, is immersed vertically in a water tank completely. A tuning fork of 660 Hz is vibrated and kept at the upper end of the tube and the tube is gradually raised out of water the total number of resonances heard before the tube comes out of water taking velocity of sound air 330m//s is

The lower end of a clean glass capillary tube of internal radius 2 xx 10^(-4) m is dippled into a beaker containing water . The water rise up the tube to a vertical height of 7 xx 10^(-2) m above its level in the beaker. Calculate the surface tension of water. Density of water = 1000 kg m^(-3), g = 10 m s^(-2) .