Home
Class 11
PHYSICS
The area of cross section of the two arm...

The area of cross section of the two arms of a hydraulic press are `1cm^(2)` and `10cm^(2)` respectively . A force of `5N` is applied on the water in the thinner arm. What force should be applied on the water in the thicker arm so that the water may remain in equilibrium?
.

A

`50N`

B

`60N`

C

`70N`

D

`80N`

Text Solution

Verified by Experts

The correct Answer is:
A
Promotional Banner

Similar Questions

Explore conceptually related problems

The area of cross section of the two arms of a hydraulilc press are 1 cm^2 and 10 cm^2 respectively figure. A force of 5N is applied on the water in the thinner arm. What force should be applied on the water in the thicker arm so that the water may remain in equilibrium? ,

The area of cross section of the two arms of a hydraulilc press are 1 cm^2 and 10 cm^2 respectively figure. A force of 5N is applied on the water in the thinner arm. What force should be applied on the water in the thicker arm so that the water may remain in equilibrium? ,

The area of cross sectioin of the two arms of a hydraulic press is 1cm^(2) and 20 cm^(2) respectively. A force of 10 N is applied on the water in the thinner arm. What force should be applid on the water in the thicker arms so that water may remain in equilibrium?

The area of cross-section of the two vertical arms of a hydraulic press are 1 cm ^(2) and 10 cm^(2) respectively. A force of 10N applied. As shown in the figure, to a tight fitting light piston in the thinner arm balances a force F applied to the corresponding piston in the thicker arm. Assuming that the levels of water in both the arms are the same, we can conclude:-

The radius of one arm of a hydraulic lift is three times the radius of the other arm. What force should be applied on the narrow arm so as to lift 50 kg at the wider arm?

In an arrangement similar to a hydraulic lift, the diameters of smaller and larger pistons are 1.0 cm and 3.0 cm respectively. What is the force exerted on the larger piston when a force of 10 N is applied to the smaller piston?

A area of cross section of a large tank is 0.5m^2 . It has an opening near the bottom having area of cross section 1cm^2 . A load of 20 kg is applied on the water at the top. Find the velocity of the water coming out of the opening at the time when the height of water level is 50 cm above the bottom. Take g=10ms^-2

A area of cross section of a large tank is 0.5m^2 . It has an opening near the bottom having area of cross section 1cm^2 . A load of 20 kg is applied on the water at the top. Find the velocity of the water coming out of the opening at the time when the height of water level is 50 cm above the bottom. Take g=10ms^-2

The area of cross section of press plunger of a hydraulic press is 4 m^2 . It is required to overcome a resistiveload of 400 kg on it. Calculate the force required on the pump plunger if the area of cross section of the pump plunger is 0.01 m^2 .

In a hydraulic machine, a force of 2 N is applied on the piston of area of cross section 10 "cm"^2 . What force is obtained on its piston of area of cross section 100 "cm"^2 ?