Home
Class 11
PHYSICS
While measuring the thermal conductivity...

While measuring the thermal conductivity of a liquid, we keep the upper part hot and lower part cool, so that

A

Convection may be stopped

B

Radiation may be stopped

C

Heat conduction is easier downwards

D

Both convection and radiation may be stopped

Text Solution

Verified by Experts

The correct Answer is:
A
Promotional Banner

Similar Questions

Explore conceptually related problems

While measuring the thermal conductivity of liquids the upper part is kept hot and lower cooled so that .

Two liquids of densities p_(1) and p_(2) (p2_= 6 p1 ) are filled up behind a square wall of side 8 m as shown in figure. The liquids have height as shown. The ratio of the forces due to these liquids exerted on upper part MN to that at the lower part NO is (Assume that the liquids are not mixing)

Two liquids of densities rho_1 and rho_2(rho_2 = 3 rho_1) are filled up behind a square wall of side 6 m as shown in figure. Each liquid has a height of 3 m. The ratio of the forces due to these liquids exerted on upper part MN to that at the lower part NO is (Assume that the liquids are not mixing)2

Two liquids of densities rho_1 and rho_2(rho_2 = 3 rho_1) are filled up behind a square wall of side 6 m as shown in figure. Each liquid has a height of 3 m. The ratio of the forces due to these liquids exerted on upper part MN to that at the lower part NO is (Assume that the liquids are not mixing)2

Two liquids of densities rho_(1) and rho_(2)(rho_(2) = 2rho_(1)) are filled up behind a square wall of side 10 m as shown in the figure. Each liquids has a height of 5m. The ratio of the forces due to these liqyuids exeted on upper part MN to that at the lower part NO is (Assume that the liquids are not mixing):

If a cone is cut into two parts by a horizontal plane passing through the mid-point of its axis, the ratio of the volumes of upper and lower part is (a) 1:2 (b) 2:1 (c) 1:7 (d) 1:8

If a cone is cut into two parts by a horizontal plane passing through the mid-point of its axis, the ratio of the volumes f upper and lower part is (a) 1:2 (b) 2:1 (c) 1:7 (d) 1:8

A non-conducting cylindrical vessel of length 3l is placed horizontly & is divided into three parts by two easily moving piston having low thermal conductivity as shown in figure. These parts contains H_(2) , He and CO_(2) gas at initial temp. theta_(1) = 372^(@)C, theta_(2) = -15^(@)C and theta_(3) = 157^(@)C respectively. If initial length and pressure of each part are l and P_(0) respectively. calculate final pressure and length of each part . Use : gamma_(co_(2)) = 7//5

A vernier callipers is constructed by using two identical triangular wedges each of angle of inclination alpha=60^(@) . Assume that one division is equivalent to 1mm. While measuring length AB, the reading of lower wedge is 8th mark and 7th mark of upper wedge coincide with. a particular mark of lower wedge. Mark the correct option (s)

Prove that the loss in weight of a body when immersed wholly or partially in a liquid is equal to the buoyant force (or upthrust) and this loss is because of the difference in pressure exerted by liquid on the upper and lower surfaces of the submerged part of the body.