Home
Class 11
PHYSICS
A uniform rod is placed vertically on a ...

A uniform rod is placed vertically on a smooth surface and then released . Then,

A

vertically up

B

vertically down

C

in a parabolic

D

horizontally

Text Solution

Verified by Experts

The correct Answer is:
B
Promotional Banner

Similar Questions

Explore conceptually related problems

A uniform straight rod is placed in vertical position on a smooth horizontal surface and released. As the rod is in motion, the centre of mass moves

A uniform rod is kept vertically on a horizontally smooth surface at a point O. IF it is rotated slightly and released, it falls down on the horizontal surface. The lower end will remain

A slender uniform rod of mass M and length l is pivoted at one end so that it can rotate in a vertical plane, Fig. There is negligible friction at the pivot. The free end is held vertically above the pivot and then released. The angular acceleration of the rod when it makes an angle theta with the vertical is

Two identical rods are joined at one of their ends by a pin. Joint is smooth and rods are free to rotate about the joint. Rods are released in vertical plane on a smooth surface as shown in the figure. The displacement of the joint from its initial position to the final position is (i.e. when the rods lie straight on the groun )

A uniform rod of length l is kept vertically on a rough horizontal surface at x = 0 . It is rotated slightly and released . When the rod finally falls on the horizontal surface , the lower end will remain at

A uniform sphere is place on a smooth horizontal surface and as horizontal force F is appied on it at a distance h above the surface. The acceleratioin of the centre

Two equal rods joined at one end are kept on a smooth surface as shown and released Trajectory of centre of mass of both rods is :-

A uniform rod of length L and mass M is pulled horizontally on a smooth surface with a force F . Determine the elongation of rod if Young's modulus of the material is Y .

A rod of length L is held vertically on a smooth horizontal surface. The top end of the rod is given a gentle push. At at certain instant of time, when the rod makes an angle 37^@ with horizontal the velocity of COM of the rod of 2m//s . The velocity of the end of the rod in contact with the surface at that instant is

Two blocks of masses m_(1) and m_(2) are connected by a massless spring and placed on smooth surface. The spring initially stretched and released. Then :