Home
Class 11
PHYSICS
The length of a metallic sheet is measur...

The length of a metallic sheet is measured as 10.0 cm using a metre scale of L.C. 0.1cm and its breadth is, measured as 1.00 cm using a vernier callipers of L.C. 0.01 cm, the error in area is

A

`pm0.01 cm^2`

B

`pm 0.1 cm^2`

C

`+0.11 cm^2`

D

`pm 0.2 cm^2`

Text Solution

Verified by Experts

The correct Answer is:
D
Promotional Banner

Similar Questions

Explore conceptually related problems

The least count of a vernier callipers is 0.01 cm. Then, the error in the measurement is

The length of a cylinder is measured as 5 cm using a vernier calipers of least count 0.1 mm. The percentage error is

The length of a rectangular plate is measured as 10 cm by a vernier scale of least count 0.01 cm and its breadth as 5 cm by the same scale. The percentage error in area is

The breadth of a thin rectangular sheet is measured as 10.1 cm. The approximate error in the measurement is

The length of a rectangular plate is measured by a meter scale and is found to be 10.0 cm . Its width is measured by vernier callipers as 1.00 cm . The least count of the meter scale and vernier calipers are 0.1 cm and 0.01 cm respectively. Maximum permissibe error in area measurement is.

The length of a rectangular plate is measured by a meter scale and is found to be 10.0 cm . Its width is measured by vernier calipers as 1.00 cm . The least count of the meter scale and vernier calipers are 0.1 cm and 0.01 cm respectively. Maximum permissibe error in area measurement is.

The circumference of a circle is measured as 28cm with an error of 0.01cm. The percentage error in the area is

The diameter of a wire is measured as 0.25 cm using a screw gauge of least count 0.005 cm. The percentage error is

The length of a wire is measured with a metre scale having least count 1mm . Its diameter is measued with a vernier calipers of least count 0.1mm . Given that length and diameter of the wire are measured as 5cm and 4mm , the percentage error in the calculated value of volume of the wire will be

The length of a strip measured with a meter rod is 10.0 cm . Its width measured with a vernier callipers is 1.00 cm . The least count of the meter rod is 0.1 cm and that of vernier callipers is 0.01 cm . What will be the error in its area?