Home
Class 11
PHYSICS
A vessel whose bottom has round holes wi...

A vessel whose bottom has round holes with diameter `0.1 mm`, is filled with water. The maximum height up to which water can be filled without leakage is

A

20 cm

B

40 cm

C

30 cm

D

60 cm

Text Solution

Verified by Experts

The correct Answer is:
C
Promotional Banner

Similar Questions

Explore conceptually related problems

A vessel, whose bottom has round holes with diameter of 0.1 mm , is filled with water. The maximum height to which the water can be filled without leakage is (S.T. of water =75 dyne/cm , g=1000 cm/s)

A vessel whose bottom has round holes with a diameter of d=0.1mm is filled with water. The maximum height of the water level h at which the water does not flow out, will be (The water does not wet the bottom of the vessel). [ST of water=70 "dyne"//cm]

A vessel whose bottom has round holes with diameter of 1 mm is filled with water Assuming that surface tension acts only at holes, then the maximum height to which the water can be filled in vessel without leakage is (given surface tension of water is 75xx10^(-3)N//m) and g=10m//s^(2)

A cylindrical tank has a hole of 1cm^(2) in its bottom. If the water is allowed to flow into the tank from a tube above it at the rate of 70cm^(3)//sec , then the maximum height up to which water can rise in the tank is

A cylindrical tank has a hole of 1cm^(2) in its bottom. If the water is allowed to flow into the tank from a tube above it at the rate of 70cm^(3)//sec , then the maximum height up to which water can rise in the tank is

A container of height 10 cm is filled with water. There is hole at bottom. Find the pressure difference between point A & B .

A wide vessel with a small hole in the bottom is filled with water and kerosene. Find the velocity of water flow if the thickness of water layer is h_(1)=30 cm and that of kerosene is h_(2)=20cm brgt

A cylinderical tank of height 0.4 m is open at the top and has a diameter 0.16m. Water is filled in it up to height of 0.16 m. Find the time taken to empty the tank through a hole of radius 5 xx 10^(-3)m in its bottom.

A cylindrical tank has a hole of diameter 2r in its bottom. The hole is covered wooden cylindrical block of diameter 4r, height h and density rho//3 . Situation I: Initially, the tank is filled with water of density rho to a height such that the height of water above the top of the block is h_1 (measured from the top of the block). Situation II: The water is removed from the tank to a height h_2 (measured from the bottom of the block), as shown in the figure. The height h_2 is smaller than h (height of the block) and thus the block is exposed to the atmosphere. Find the minimum value of height h_1 (in situation 1), for which the block just starts to move up?

A cylindrical tank has a hole of diameter 2r in its bottom. The hole is covered wooden cylindrical block of diameter 4r, height h and density rho//3 . Situation I: Initially, the tank is filled with water of density rho to a height such that the height of water above the top of the block is h_1 (measured from the top of the block). Situation II: The water is removed from the tank to a height h_2 (measured from the bottom of the block), as shown in the figure. The height h_2 is smaller than h (height of the block) and thus the block is exposed to the atmosphere. Find the minimum value of height h_1 (in situation 1), for which the block just starts to move up?