When 0.005A current flows through a movi...

When 0.005A current flows through a moving coil galvanometer, it gives fullscale deflection. It is converted into a voltmeter to read 5 Volt, using an external resistance of `975Omega`. The resistance of galvanometer in ohms is

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

MOVING CHARGES AND MAGNETISM
AAKASH SERIES|Exercise EXERCISE-III|49 Videos
MOVING CHARGES AND MAGNETISM
AAKASH SERIES|Exercise EXERCISE-IB|71 Videos
MOTION IN A STRAIGHT LINE
AAKASH SERIES|Exercise very Short answer type question|15 Videos
NUCLEAR PHYSICS
AAKASH SERIES|Exercise ADDITIONAL PRACTICE PRACTICE SHEET (ADVANCED) Integer Type Questions|3 Videos

Similar Questions

Explore conceptually related problems

A galvanometer can withstand safely a maximum current of 5 mA. If is converted into voltmeter readding upto 20 V by connecting in series an external resistance of 3960 Omega . The resistance of galvanometer is

When a current is passed in moving coil galvanometer, the coil gets deflected because,

When 500μA curre nt is passed through a galvanometer of 20Omega , it gives a full scale deflection. The external resistance need to be connected to measure 5V is

The deflection in moving coil galvanometer is reduced to half when it is shunted with a 40 Omega coil . The resistance of the galvanometer is

A moving coil galvanometer has resistance 50 Omega and it indicates full deflection at 4 m A current. A voltmeter is made using this galvanometer and a 5k Omega resistance. The maximum voltmeter, will be close be :

A galvanometer of resistance 1000Omega gives full-scale deflection for a current of 1mA. To measure a P.D of 10V, the resistance to be connected with the galvanometer is

To send 10% of the main current through a moving coil galvanometer of resistance 9 Omega , shunt S required is

To send 10% of the main current through a moving coil galvanometer of resistance 99Omega , the shunt required is –

A galvanometer of resistance 50Omega given full-scale deflection for a current of 10 mA is to be changed into a voltmeter of rang 100 V . What should be the Value of resistance to be added in series with this galvanometer ?

AAKASH SERIES-MOVING CHARGES AND MAGNETISM-EXERCISE-II

A current or 0.5 A produces a deflection of 60° in a tangent galvanome...
Text Solution
|
A tangent galvanometer shows no deflection when a current is passed th...
Text Solution
|
The senstivity of a galvanometer that measures current is decreased by...
Text Solution
|
In a galvanometer 5% of the total current in the circuit passes throug...
Text Solution
|
A galvanometer of resistance 150 ohm is shunted such that only 1/11 of...
Text Solution
|
A galvanometer has coil of resistance 50Omega and shows full deflectio...
Text Solution
|
A galvanometer has a current range of 15mA and voltage range of 750mv....
Text Solution
|
To convert a 800 mV range milli-voltmeter of resistance 40.Q into a mi...
Text Solution
|
In a galvanometer, a current of 1muA produces a deflection of 20 divis...
Text Solution
|
A galvanometer of resistance 40Omega and current passing through it is...
Text Solution
|
An electrical meter of internal resistance 20Omega gives a full scale ...
Text Solution
|
The sensitivity of a galvanometer is 60 divisions/Amp. When a shunt is...
Text Solution
|
When 500μA curre nt is passed through a galvanometer of 20Omega , it g...
Text Solution
|
A galvanometer of 25 ohm resistance can read a maximum current of 6mA....
Text Solution
|
The scale of a galvanometer of resistance 100Omega contains 25 divisio...
Text Solution
|
When 0.005A current flows through a moving coil galvanometer, it gives...
Text Solution
|
A voltmeter has a resistance of G ohm and range V volt. The value of r...
Text Solution
|
A circuit contains an ammeter, a battery of 30V and a resistanace 40.8...
Text Solution
|
A 250-turn rectangular coil of length 2.1 cm and width 1.25 cm carries...
Text Solution
|
To know the resistance G of a galvanometer by half deflection method,a...
Text Solution
|