The specification on a heater coil is 25...

The specification on a heater coil is `250 V, 500 W`. Calculate the resistance of the coil. What will be the resistance of a coil of `1000W` to operate at the same voltage?

`100 S`

`150 S`

`200 S`

`210 S`

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

APPENDICES ( REVISION EXERCISE )
AAKASH SERIES|Exercise REVISION EXERCISE (MOVING CHANGES & MEGNETISM)|95 Videos
APPENDICES ( REVISION EXERCISE )
AAKASH SERIES|Exercise REVISION EXERCISE (MAGNETISM AND MATTER )|52 Videos
APPENDICES ( REVISION EXERCISE )
AAKASH SERIES|Exercise REVISION EXERCISE (ELECTRIC POTENTIAL & CAPACITANCE )|143 Videos
ALTERNATING CURRENT
AAKASH SERIES|Exercise EXERCISE - III|24 Videos
APPENDICES (REVISION EXERCISE)
AAKASH SERIES|Exercise LAW OF MOTION|128 Videos

Similar Questions

Explore conceptually related problems

An electric heater is rated 1000 W - 200 V. Calculate the resistance of the heating element.

A 1250 W heater operates at 115V . What is the resistance of the heating coil?

Calculate the resistance of two coils if their equivalent resistance in series and parallel are respectively 18 Omega and 4 Omega

The resistance of a coil for DC is 5Omega . In case of AC, the resistance will

A 1600 W , 180 V heater operates at 180 V . The resistance of heating coil is

If average power absorbed by induction coil (L = 1H) is 1W, then the resistance of the coil is :

A heater coil is to be constructed with a nichrome wire (rho = 1.0 xx 10^(-6) Omegam) which can operate at 500 W when connected to a 250 V supply. (a) What would be the resistance of the coil? (b) If the cross-sectional area of the wire is 0.5 mm^2 , what length of the wire will be needed? (c) If the radius of each turn is 4.0 mm , how many turns will be there in the coil?

If R_(1) and R_(2) are filament resistances of a 200 W and a 100 W bulb respectively, designed to operate on the same voltage, then :

AAKASH SERIES-APPENDICES ( REVISION EXERCISE )-REVISION EXERCISE (CUTTENT ELECTRICITY )

Same mass of copper is drawn into 2 wires of 1 mm thick and 3mm thick....
Text Solution
|
Masses of three wires are in the ratio 1:3:5. Their lengths are in the...
Text Solution
|
The specification on a heater coil is 250 V, 500 W. Calculate the resi...
Text Solution
|
In the following circuit, 5Omega resistor develops 45 J/s due to curre...
Text Solution
|
In a large building, there are 15 bulbs of 40 W, 5 bulbs of 100 W, 5 f...
Text Solution
|
Two wires A and B of the same material and mass have their length in t...
Text Solution
|
Two wires 'A' and 'B' of the same material have their lengths in the r...
Text Solution
|
When two identical cells are connected either in series or in parallel...
Text Solution
|
Two cells of the same e.mf. e but different internal resistances r(1) ...
Text Solution
|
The p.d. across the terminals of a battery is 50 V when 11 A are drawn...
Text Solution
|
A dc source of emf E1 = 100 V and internal resistance r =0.5 Omega ,a ...
Text Solution
|
A 6V cell with 0.5Omega internal resistance and 10V cell with 1Omega i...
Text Solution
|
A 5V battery with internal resistance 2 Omega and a 2V battary with i...
Text Solution
|
If in the circuit shown below, the internal resistnace of the battery ...
Text Solution
|
In the circuit shown, a voltmeter of internal resistance 'R' when conn...
Text Solution
|
For a cell, the graph between the p.d.(V) across the terminals of the ...
Text Solution
|
When two cells of different emf's are connected in series to an extern...
Text Solution
|
How many cells each marked (6V-12A) should be connected in mixed group...
Text Solution
|
Find the minimum number of cells required to produce an electric curre...
Text Solution
|
A d.c main supply of e.m.f 220 V is connected across a storage battery...
Text Solution
|