Home
Class 12
PHYSICS
A carrier wave of 1000 W is subjected to...

A carrier wave of 1000 W is subjected to 100% modulation. Calculate (i) Power of modulated wave, (ii) Power in USB, (ii) Power in LSB.

Text Solution

Verified by Experts

i)Total power of modulated wave
`P_(T)=P_(C)(1+(m^(2))/(2))=1000(1+(I^(2))/(2))=1500`watt
ii)Power in USB `=(1)/(2)P_(SB)`
Where power carried by side bands is given by amplitude Modulation and Detection
`P_(SB)=P_(C)((m^(2))/(2))=1000((l^(2))/(2))=1500` watt
`P_(USB)=(1)/(2)P_(SB)=(1)/(2)xx500=250` watt
`P_(LSB)=P_(USB)=250` watt
Promotional Banner

Similar Questions

Explore conceptually related problems

A carrier wave of 1000 W is subjected to 100% modulation. Calculate (i) Power of modulated wave, (ii) Power in USB, (iii) Power in LSB.

A 400 W carrier wave is modulated to a depth of 75%. Calculate the total power in the modulated wave.

A 300W carrier is modulated to a depth 75%. The total power in the modulated wave is

An AM wave has 1800 watt of total power content, For 100% modulation the carrier should have power content equal to

A 100 V carrier wave is mode to vary betqeen 160 and 40 V by a modulating signal . What is the modulation index ?

An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as (i) R = 1 k Omega, C = 0.01 mu F (ii) R = 10 k Omega, C = 0.01 muF (iii) R = 10k Omega , C = 1 mu muF .

An audio signal is modulated by a carrier wave of 20 MHz such that the bandwidth required for modulation is 3 kHz. Could this wave be demodulated by a diode detector which has the values of R and C as (i) R = 1 k Omega, C = 0.01 mu F (ii) R = 10 k Omega, C = 0.01 muF (iii) R = 10k Omega , C = 1 mu muF .

A carrier wave of amplitude A is used to modulate (amplitude) the signal.Modulated signal amplitude swings from 0.1 A to 1.9A,calculate modulation index.

A carrier wave of amplitude A is used to modulate (amplitude) the signal.Modulated signal amplitude swings from 0.1 A to 1.9A,calculate modulation index.

A sinusoidal voltage of amplitude 25 volts and frequency 50 Hz is applied to a half wave rectifier using PN diode. No filter is used and the load resistor is 1000 Omega . The forward resistance R_(f) ideal diode is 10 Omega . Calculate. (i) Peak, average and rms values of load current (ii) d.c power output (ii) a.c power input (iv) % Rectifier efficiency (v) Ripple factor.