Home
Class 11
PHYSICS
The side of a cube, as measured with a v...

The side of a cube, as measured with a vernier calipers of least count 0.01 cm is 3.00 cm. The maximum possible error in the measurement of volume is

A

`+- 0.01 cm^(3)`

B

`+- 0.06cm^(3)`

C

`+- 0.0cm^(3)`

D

`+- 0.27cm^(3)`

Text Solution

Verified by Experts

The correct Answer is:
D
Promotional Banner

Similar Questions

Explore conceptually related problems

The dimensions of a rectangular block measured with a vernier callipers having least count of 0.1mm is 5mmxx10mmxx5mm . The maximum percentage error in measurement of volume of the blcok is

The dimensions of a rectangular block measured with a vernier callipers having least count of 0.1mm is 5mmxx10mmxx5mm . The maximum percentage error in measurement of volume of the blcok is

The length of a cylinder is measured as 5 cm using a vernier calipers of least count 0.1 mm. The percentage error is

The least count of a vernier callipers is 0.01 cm. Then, the error in the measurement is

A rectangular metal slab of mass 33.333 g has its length 8.0 cm, breadth 5.0 cm and thickness 1mm. The mass is measured with accuracy up to 1 mg with a senstitive balance. The length and breadth are measured with a vernier calipers having a least count of 0.01 cm. The thickness is measured with a screwgauge of least count 0.01 mm. Calculate the percentage accuracy in density from above measurements.

In Searl's experiment, which is used to find Young's Modulus of elasticity, the diameter of experimental wire is D = 0.05cm (measured by a scale of least count 0.001cm ) and length is L = 110cm (measured by a scale of least count 0.1cm ). A weight of 50N causes an extension of X = 0.125 cm (measured by a micrometer of least count 0.001cm ). find the maximum possible error in the values of Young's modulus. Screw gauge and meter scale are free error.

In searle's experiment, the diameter of the wire, as measured by a screw gauge of least count 0.001 cm is 0.500 cm. The length, measured by a scale of least count 0.1cm is 110.0cm. When a weight of 40N is suspended from the wire, its extension is measured to be 0.125 cm by a micrometer of least count 0.001 cm. Find the Young's modulus of the meterial of the wire from this data.

In an experiment of simple pendulum , the time period measured was 50 s for 25 vibrations when the length of the simple pendulum was taken 100 cm . If the least count of stop watch is 0.1 s and that of meter scale is 0.1 cm . Calculate the maximum possible error in the measurement of value of g . If the actual value of g at the place of experiment is 9.7720 m s^(-2) , Calculate the percentage error.

The length of a rectangular plate is measured by a meter scale and is found to be 10.0 cm . Its width is measured by vernier calipers as 1.00 cm . The least count of the meter scale and vernier calipers are 0.1 cm and 0.01 cm respectively. Maximum permissibe error in area measurement is.

The length of a rectangular plate is measured by a meter scale and is found to be 10.0 cm . Its width is measured by vernier callipers as 1.00 cm . The least count of the meter scale and vernier calipers are 0.1 cm and 0.01 cm respectively. Maximum permissibe error in area measurement is.