Home
Class 11
PHYSICS
In superposition theorem, when we consid...

In superposition theorem, when we consider the effect of one voltage source, all the other current sources are ____________
a) Shorted
b) Opened
c) Removed
d) Undisturbed

Text Solution

Verified by Experts

The leftside of the container has a gas
having a molecular` weight=M_1` and right
part has molecular `weight=M_2`
The temperature of both left and right chambers are equal since the separator is diathermic
` (sqrt(3RT))/(sqrt(M_1)) = (sqrt(8RT))/(sqrt(pi M_2))`
` rArr (3RT)/M_1 =(8RT)/(pi M_2)`
` rArr (M_1)/(pi M_2) = 3/8 `
` rArr (M_1)/(M_2)=(3 pi/8) =1.1775 =1.18`
Promotional Banner

Similar Questions

Explore conceptually related problems

A sinusoidal voltage of peak value 283 V and frequency 50 Hz is applied to a series LCR circuit in which R = 3Omega, L = 25.48 mH, and C = 796 muF . Find (a) the impedance of the circuit, (b) the phase difference between the voltage across the source and the current, (c) the power dissipated in the circuit, and (d) the power factor.

A point source is emitting 0.2 W of ultravio- let radiation at a wavelength of lambda = 2537 Å . This source is placed at a distance of 1.0 m from the cathode of a photoelectric cell. The cathode is made of potassium (Work function = 2.22 eV ) and has a surface area of 4 cm^(2) . (a) According to classical theory, what time of exposure to the radiation shall be required for a potassium atom to accumulate sufficient energy to eject a photoelectron. Assume that radius of each potassium atom is 2 Å and it absorbs all energy incident on it. (b) Photon flux is defined as number of light photons reaching the cathode in unit time. Calculate the photon flux. (c) Photo efficiency is defined as probability of a photon being successful in knocking out an electron from the metal surface. Calculate the saturation photocurrent in the cell assuming a photo efficiency of 0.1. (d) Find the cut – off potential difference for the cell.

When a monochromatic point source of light is at a distance of 0.2 m from a photoelectric cell, the cut off voltage and the saturation current are respectively 0.6 V and 18.0 mA. If the same source is placed 0.6 m away from the photoelectric cell, then (a) the stopping potential will be 0.2 V (b) the stopping potential will be 0.6 V (c ) the saturation current will be 6.0 mA (d) the saturation current will be 2.0 mA

A series LCR circuit with L = 0.12 H, C = 480 nF, R = 23 Omega is connected to a 230 V variable frequency supply. (a) What is the source frequency for which current amplitude is maximum. Obtain this maximum value. (b) What is the source frequency for which average power absorbed by the circuit is maximum. Obtain the value of this maximum power. (c) For which frequencies of the source is the power transferred to the circuit half the power at resonant frequency? What is the current amplitude at these frequencies? (d) What is the Q-factor of the given circuit?

A glass wedge with a small angle of refraction theta is placed at a certain distance from a converging lens with a focal length f ,one surface of the wedge being perpendicular to the optical axis of the lens. A point sources S of light is on the other side of the lens at its focus. The rays reflected from the wedge (not from base) produce, after refraction in the lens , two images of the source displaced with respect to each other by d. Find the refractive index of the wedge glass. [Consider only paraxial rays.]

Consider the various options we have when we choose a fuel for cooking our food. Would your choice be different if you lived ………………………..... (a) In a forest? (b) In a remote mountain village or small island? (c) In New Delhi? (d) lived five centuries ago?

Figure shows a metal rod PQ resting on the smooth rails AB and positioned between the poles of a permanent magnet. The rails, the rod, and the magnetic field are in three mutual perpendicular directions. A galvanometer G connects the rails through a switch K. Length of the rod =15 cm, B =0.50 T, resistance of the closed loop containing the rod 9.0 m Omega . Assume the field to be uniform. (a) Suppose K is open and the rod is moved with a speed of 12 "cm s"^(-1) in the direction shown. Give the polarity and magnitude of the induced emf. (b) Is there an excess charge built up at the ends of the rods when K is open ? What if K is closed ? (c) With K open and the rod moving uniformly, there is no net force on the electrons in the rod PQ even though they do experience magnetic force due to the motion of the rod. Explain. (d) What is the retarding force on the rod when K is closed ? How much power is required (by an external agent) to keep the rod moving at the same speed (= 12 cm s^(-1) ) when K is closed ? How much power is required when K is open? (f)How much power is dissipated as heat in the closed circuit ? What is the source of this power ? (g) What is the induced emf in the moving rod if the magnetic field is parallel to the rails instead of being perpendicular ?

A monochromatic point source radiating wavelength 6000Å with power 2 watt, an aperture A of diameter 0.1 m and a large screen SC are placed as shown in fig, A photoemissive detector D of surface area 0.5 cm^(2) is placed at the centre of the screen . The efficiency of the detector for the photoelectron generation per incident photon is 0.9 (a) Calculate the photon flux at the centre of the screen and the photo current in the detector. (b) If the concave lens L of focal length 0.6 m is inserted in the aperture as shown . find the new values of photon flux and photocurrent Assume a uniform average transmission of 80% from the lens . (c ) If the work function of the photoemissive surface is 1eV . calculate the values of the stopping potential in the two cases (within and with the lens in the aperture).