The cylindrical tube of a spary pump has a cross-section of `6 cm^(2)` one of which has 50 holes each of diameter `1mm`. If the liquid flow inside the tube is `1.2m` per minutes, then the speed of ejection of the liquid through the holes is

The cylinderical tube of a spray pump has a cross-section of 6 cm^(2) one of which has 50 holes each of diameter 1 mm. If the liquid flow inside the tube is 1.2 m per minutes, then the speed of ejection of the liquid through the holes is

The cylindrical tube of a spray pump has a cross-section of 6 cm^2 one of which has 50 holes each of diameter 1 mm. If the liquid flow inside the tube is 1.2 m/min, then speed of ejection of the liquid through the holes is

The cylindrical tube of a spray pump has a cross-section of 6 cm^2 one of which has 50 holes each of diameter 1 mm. If the liquid flow inside the tube is 1.2 m/min, then speed of ejection of the liquid through the holes is

The cylinderical tube of a spray pump has a cross-section of 8.0cm^(2) one end of which has 40 fine holes each of diameter 1.0mm. If the liquid flow inside the tube is 1.5 m per minute, what is the speed of ejection of the liquid through the holes?

The cylinderical tube of a spray pump has a cross-section of 8.0cm^(2) one end of which has 40 fine holes each of diameter 1.0mm. If the liquid flow inside the tube is 1.5 m per minute, what is the speed of ejection of the liquid through the holes?

The cylindrical tube of a spray pump has a cross-section of 8 cm^(2) . one end of which has 40 fine holes each of diameter 10 mm. If the liquid flow inside the tube is 0.15 m per minute, what is the speed of ejection of the liquid through the holes ?

The cylindrical tube of a spray pump has a cross-section of 8.0 cm^2 one end of which has 40 fine holes each of diameter 1.0 mm. If the liquid flow inside the tube is 1.5 m min^-1 , what is the speed of ejection of the liquid through the holes ?

The cylindrical tube of a spray pump has a cross-section of 8.0 cm2 one end of which has 40 fine holes each of diameter 1.0 mm. If the liquid flow inside the tube is 1.5 m min-^1 , what is the speed of ejection of the liquid through the holes?