For the given logic gate circuit, to get output as `1` at `R`, find the input of `X`, if input value of `Y` is zero

the output given logic circuit is :

To get output '1' at R, for the given logic gate circuit the input values must be :

The output of the given logic circuit is

The output of the given logic gate is

For the given logic gate network, the output at Y when A = 1 , B = 1 and A = 0 , B = 0 are

For given logic diagram, outupt F = 1, then inputs are

(i) Identify the logic gates marked P and Q in the given logic circuit. (ii) Write down the output at X for the inputs A = 0 , B = 0 and A = 1 , B = 1.

To get an output 1 from the circuit shown in figure the input must be :

When the inputs of a two input logic gate are 0 and 0, the output is 1. When the inputs are 1 and 0, the output is zero. The type of logic gate is

The following figure shows a logic gate circuit with two inputs A and B and the output Y. The voltage waveforms of A,B and Y are as given : The logic gate is