Home
Class 12
PHYSICS
A moving coil galvanometer can be conver...

A moving coil galvanometer can be converted into a voltmeter by connecting :

A

a low resistance in series with its coil.

B

a low resistance in parallel with its coil.

C

a high resistance in parallel with its coil

D

a high resistance in series with its coil

Text Solution

Verified by Experts

The correct Answer is:
D

A volt meter is a device with a very High resistance. It is connected in parallel to the device under test. A high resistance allows to drop all the voltage while drawing least possible current. Fill in the blanks
Promotional Banner

Similar Questions

Explore conceptually related problems

A galvanometer can be converted into an ammeter by connecting

STATEMENT-1 : Galvanometer can be converted into voltmeter by connecting a large shunt in its series. STATEMENT-2 : Galvanometer can be converted into an ammeter by connecting a small shunt in its parallel. STATEMENT-3 : Galvanometer cannot be converted into voltmeter or ammeter.

A galvanometer can be used as a voltmeter by connecting

State how a moving coil galvanometer can be converted into an ammeter.

In a moving coil galvanometer is based on the

A galvanometer (coil resistance 99 Omega .) is converted into an ammeter using a shunt of 1 Omega and connected as shown in figure (a). The ammeter reads 3 A . The same galvanometer is convened into a voltmeter by connecting a resistance of 101 Omega in series. This voltmeter is connected at, shown in figure (b). Its reading is found to be 4/5 of the full scale reading. Find : (a) internal resistance r of the cell (b) range of the ammeter and voltmeter (c) full scale deflection current of the galvanometer.

A moving coil galvnometer is converted into an ammeter reading up to 0.03 A by connecting a shunt of resistance r/4 . What is the maximum current which can be sent through this galvanometer if no shunt is used (here r=resistance of galvanometer)

A galvanometer coil has a resistance of 50 Omega and the meter shows full scale deflection for a current of 5 mA . This galvanometer is converted into a voltmeter of range 0 - 20 V by connecting

A galvanometer has 30 divisions and a sensitivity 16 mu A //"div" . It can be converted into a voltmeter to read 3 V by connecting