Home
Class 12
PHYSICS
Potentiometer...

Potentiometer

Promotional Banner

Similar Questions

Explore conceptually related problems

The balancing length for a cell in a potentiometer experiment is 45 cm. In the balanced condition, the current through the potentiometer wire is 2 A. If the total length of the potentiometer wire is 1 m and its total resistance is 60Omega , the emf of the cell is (in Volts) _________.

A 2 V battery, a 990Omega resistor and a potentiometer of 2 m length, all are connected in series of the resistance of potentiometer wire is 10Omega , then the potential gradient of the potentiometer wire is

A 2 V battery, a 990Omega resistor and a potentiometer of 2 m length, all are connected in series of the resistance of potentiometer wire is 10Omega , then the potential gradient of the potentiometer wire is

In potentiometer experiment, null point isobtained at a particular point for a cell on potentiometer wire x cm long. If the lengthof the potentiometer wire is increasedwithout changing the cell, the balancing length will (Driving source is not changed)

A constant voltage V_(0) is applied to a potentiometer of resistance R connected to an ammeter. A constant resistor r is connected to the sliding contact of the potentiometer and the fixed end of the potentiometer. If the reading of ammeter vary as the sliding contact is moved from one end of the potentiometer to the other. The resistance of ammeter is assumed to be negligible. Find the minimum reading of the Ammeter.

In the adjoining figure of a potentiometer arrangement, B is the main battery, C is the cell whose emf is to be determined, WW' is the potentiometer wire, G is the galvanometer and Jis the jockey which may touch any point on the wire WW'. Choose the correct alternativels for the potentiometer to work properly

Figure shows a potentiometer circuit, a cell of emf E_1 is balanced by length l' of the potentiometer wire. If this cell is replaced by another of emf E_2 , it is found that total length of potentiometer wire has to be increased by 50%, in order to have the same balance length (l'). Then E_1//E_2 is______.

Figure shows a potentiometer circuit, a cell of emf E_1 is balanced by length l' of the potentiometer wire. If this cell is replaced by another of emf E_2 , it is found that total length of potentiometer wire has to be increased by 50%, in order to have the same balance length (l'). Then E_1//E_2 is______.

State the working principle of potentiometer. With the help of the circuit diagram, explain how a potentiometer is used to compare the emf's of two primay cells. Obtain the required expression used for comparing the emfs. Write two possible causes for one sided deflection in a potentiometer experiment.

The emf of the driver cell of a potentiometer is 2 V , and its internal resistance is negligible. The length of the potentiometer wire is 100 cm , and resistance is 5 ohm . How much resistance is to be connected in series with the potentiometer wire to have a potential gradient of 0.05 m V cm^(-1) ?