Home
Class 12
PHYSICS
A diode detector is used to detect an am...

A diode detector is used to detect an amplitude modulated wave of `60%` modulation by using a condense of capacity `250` picofarad in parallel with a load resistance `100` kilo ohm find the maximum modulated which could be find the maximum modulated frequency which could be detected by it

A

10.62 MHz

B

10.62 kHz

C

5.31 MHz

D

5.31 kHz

Text Solution

Verified by Experts

The correct Answer is:
B
Frequency (f) `= 1/(2pi muRC)`
`=1/(2pi xx 0.6xx100 xx10^3 xx 250 xx 10^(-12))`
= 10.61 KHz.
Promotional Banner

Similar Questions

Explore conceptually related problems

A diode detector is used to detect an amplitudennodulated wave of 60% modulation by using a condence of capacity 250 picodarad in parallel with a load resistance 100 kilo obm find the maximum modulated which could be find the maximum modalated frequency which could be detected by it

The minimum voltage in an amplitude modulated wave is 3 V and maximum voltage 11 V . The % modulation index is

The load on an Am diode detector consists of a resistance of 50KOmega in parallel with a capacitor of 0.001 muF . Determine the maximum modulation index that the detector can handle without distortion when modulation frequency is ( i ) 1kHz ( ii ) 5 kHz

A battery of epsilon and internal resistance r is used in a circuit with a variable external resistance R . Find the value of R for which the power consumed in R is maximum .

Calculate the power developed by an amplitude modulated wave in a load resistance of 100 Omega , if the peak voltage of carrier wave is 100 V and modulation index is 0.4.

A modulating wave of frequency 100 MHz and amplitude 100V is superimposed on a carrier wave of frequency 300 GHz and amplitude 400V . The value of modulating index and difference between the maximum frequency and minimum frequency of modulated wave are respectively :

What is the modulation index for an AM wave for which maximum amplitude is a and the minimum amplitudes is b.

A source S emitting sound of 300 Hz is fixed of block A which is attached to free end of a spring S_A as shown in the figure. The detector D fixed on block B attached to the free end of spring S_B detects this sound. The blocks A and B are simultaneously displaced towards each other through of 1.0 m and then left to vibrate. Find the maximum and minimum frequencies of sound detected by D if the vibrational frequency of each block is 2 Hz (velocity of sound is 340 m/s).