The length of a tank is 2 m, width is 1.6 m and depth is 1.0 m. It is filled with water up to a height of 0.4 meters.

The wooden plank of length 1 m and uniform cross section is hinged at one end to the bottom of a tank as shown in figure. The tank is filled with water up to a height of 0.5 m. The specific gravity of the plank is 0.5. Find the angle theta that the plank makes with the vertical in the equilibrium position. (Exclude the case theta=0 ) ,

A tank with length 10 m, breadth 8 m and depth 6 m is filled with water upto top . If G=10m//s^2 . And density of water =1000kg//m^3 , then the thrust on the bottom is:

The force does water exert on the base of a house tank of base area 1.5m^(2) when it is filled with water up to a height of 1 m is (g=10(m)/(s^(-2)))

What is force on the base of a tank of base area 1.5m^(2) when it is filled with water upto a height of 1m (rho_("water")=10^(3)kg//m^(3),P_(0)=10^(5)Pa and g=10m//s^(2))

A cylindrical tank has a radius of 154 cm. It is filled with water to a height of 3 m. If water to a height of 4.5 m is poured into it, what will be the increase in the volume of water in kl?

A cylindrical tank of height 2 m is open at the top and has a radius 50 cm. Water is filled in it upto a height 1.75 m. Calculate how long it will take to empty the tank through a hole of radius 0.05 cm in its bottom.

A water tank is 13 m long, 14 m wide and 10 m deep. It is filled with water to a level of 5 m, what part of the tank is empty?