A tube of small uniform cross section is used to siphon the water from the vessel. Then choose the correct alternative (s) :
`(rho_("water") = 10^(3) kg//m^(3), g = 10 m//s^(2), P_(atm) = 10^(5) Pa)`

An air filled balloon is at a depth of 1 km below the water level in an ocean . The normal stress of the balloon (in Pa) is (Given, rho_("water") = 10^(3) kgm^(-3), g = 9.8 ms^(-2) and P_(atm) = 10^(5) Pa)

An air filled balloon is at a depth of 1 km below the water level in an ocean . The normal stress of the balloon (in Pa) is (Given, rho_("water") = 10^(3) kgm^(-3), g = 9.8 ms^(-2) and P_(atm) = 10^(5) Pa)

A tank of large base area is filled with water up to a height of 5 m . A hole of 2 cm^(2) cross section in the bottom allows the water to drain out in continuous streams. For this situation, mark out the correct statement(s) (take rho_("water")=1000kg//m^(3),g=10ms^(-12))

A tank of large base area is filled with water up to a height of 5 m . A hole of 2 cm^(2) cross section in the bottom allows the water to drain out in continuous streams. For this situation, mark out the correct statement(s) (take rho_("water")=1000kg//m^(3),g=10ms^(-12))

A tube of uniform cross section is used to siphon water from a vessel V as shown in the figure. The pressure over the open end of water in the vessel is atmospheric pressure (P_(0)) . The height of the tube above and below the water level in the vessel are h_(1) and h_(2) , respectively. If h_(1)=h_(2) = 3.0 m , the maximum value of h_(1) , for which the siphon will work will be

A tube of uniform cross section is used to siphon water from a vessel V as shown in the figure. The pressure over the open end of water in the vessel is atmospheric pressure (P_(0)) . The height of the tube above and below the water level in the vessel are h_(1) and h_(2) , respectively. If h_(1)=h_(2) = 3.0 m , the maximum value of h_(1) , for which the siphon will work will be

A tube of uniform cross section is used to siphon water from a vessel V as shown in the figure. The pressure over the open end of water in the vessel is atmospheric pressure (P_(0)) . The height of the tube above and below the water level in the vessel are h_(1) and h_(2) , respectively. Given h_(1) = h_(2) = 3.0 m , the gauge pressure of water in the highest level CD of the tube will be

A tube of uniform cross section is used to siphon water from a vessel V as shown in the figure. The pressure over the open end of water in the vessel is atmospheric pressure (P_(0)) . The height of the tube above and below the water level in the vessel are h_(1) and h_(2) , respectively. Given h_(1) = h_(2) = 3.0 m , the gauge pressure of water in the highest level CD of the tube will be

What is force on the base of a tank of base area 1.5m^(2) when it is filled with water upto a height of 1m (rho_("water")=10^(3)kg//m^(3),P_(0)=10^(5)Pa and g=10m//s^(2))