Forces of 100 N each are applied in opposite direction on the upper and lower faces of a cube of side 20 cm. The upper face is shifted parallel to itself by 0.25 cm. If the side of the cube were 10 cm, then the displacement would be

The constant forces are applied in opposite directions on upper and lower faces of a cube of side 14 cm, shifting the upper face parallel to itself by 0.3 cm. If the sides of the cube were 28 cm, then it displacement will be

As shown in the figure forces of 10^(5) N each are applied in opposite direction on the upper and lower faces of a cube of side 10 cm shifting the upper face parallel to itselft by 0.5 cm if the side of another cube of the same material is 20cm, then under similar conditions as above the displacement will be

As shown in the figure forces of 10^(5) N each are applied in opposite direction on the upper and lower faces of a cube of side 10 cm shifting the upper face parallel to itselft by 0.5 cm if the side of another cube of th same conditions as above the displacement will be

The forces of 10^(6) N each are applied on opposite directions on upper and lower faces of a cube of side 10 cm, shifting and lower faces of a cube of side 10 cm, shifting the upper face parallel to itself by 0.8 cm. If the side of the cube were 20 cm, Then the displacement of the cube will be

Two parallel forces of 4000 N are applied tangentially in opposite direction to the opposite faces of a metallic cube of side length 0.25 m. The shear modulus of the material is 80xx10^(9) Pa. Then the displacement of the upper surface relative to the lower surface is

Two parallel and opposite forces each 5000 N are applied tangentially to the upper and lower faces of a cubical metal block of side 25 cm. the angle of shear is (The shear modulus of the metal is 80 Gpa)

Two parallel and opposite forces each 5000 N are applied tangentially to the upper and lower faces of a cubical metal block of side 25 cm. the angle of shear is (The shear modulus of the metal is 80 Gpa)

A force Fis tangentially applied on the upper face of a cube of side b and whose lower face is fixed. If modulus of rigidity is n then upper surface of cube is shifted to

A force Fis tangentially applied on the upper face of a cube of side b and whose lower face is fixed. If modulus of rigidity is n then upper surface of cube is shifted to

Two parallel and opposite forces, each of magnitude 4000 N , are applied tangentially to the upper and lower faces of a cubical metal block 25 cm on a side. Find the angle of shear and the displacement of the upper surface relative to the lower surface. The shear modulus for the metal is 80 GPa .