Home
Class 12
PHYSICS
The area of cross-section of the two ver...

The area of cross-section of the two vertical arms of a hydraulic press are 1 `cm ^(2)` and `10 cm^(2)` respectively. A force of 10N applied. As shown in the figure, to a tight fitting light piston in the thinner arm balances a force F applied to the corresponding piston in the thicker arm. Assuming that the levels of water in both the arms are the same, we can conclude:-

Promotional Banner

Similar Questions

Explore conceptually related problems

The area of cross sectioin of the two arms of a hydraulic press is 1cm^(2) and 20 cm^(2) respectively. A force of 10 N is applied on the water in the thinner arm. What force should be applid on the water in the thicker arms so that water may remain in equilibrium?

The area of cross sectioin of the two arms of a hydraulic press is 1cm^(2) and 20 cm^(2) respectively. A force of 10 N is applied on the water in the thinner arm. What force should be applid on the water in the thicker arms so that water may remain in equilibrium?

The area of cross section of the two arms of a hydraulilc press are 1 cm^2 and 10 cm^2 respectively figure. A force of 5N is applied on the water in the thinner arm. What force should be applied on the water in the thicker arm so that the water may remain in equilibrium? ,

The area of cross section of the two arms of a hydraulilc press are 1 cm^2 and 10 cm^2 respectively figure. A force of 5N is applied on the water in the thinner arm. What force should be applied on the water in the thicker arm so that the water may remain in equilibrium? ,

The area of cross section of the two arms of a hydraulilc press are 1 cm^2 and 10 cm^2 respectively figure. A force of 5N is applied on the water in the thinner arm. What force should be applied on the water in the thicker arm so that the water may remain in equilibrium? ,

The area of cross section of the two arms of a hydraulilc press are 1 cm^2 and 10 cm^2 respectively figure. A force of 5N is applied on the water in the thinner arm. What force should be applied on the water in the thicker arm so that the water may remain in equilibrium? ,

The area of cross section of two cylinders of a Bramah press are 10cm^(2)and50cm^(2) , respectively. In order to move up a weight of 100 placed on the bigger piston. what force should be applied on the smaller piston of smaller area ?

The cross-section of two piston in hydraulic press are 2cm^(2) "and" 150 cm^(2) respectivley . Calculate the minimum force required to support a weight of 2000"kg" wt on the broader face of the press.

The diameters of the smaller and larger pistons of a hydraulic press are d_(1)andd_(2) respectively. If the force applied on the smaller piston is F_(1) , then the force developed on the larger piston will be

In an arrangement similar to a hydraulic lift, the diameters of smaller and larger pistons are 1.0 cm and 3.0 cm respectively. What is the force exerted on the larger piston when a force of 10 N is applied to the smaller piston?