The V versus x plot for six identical cross-sectional area A is as shown capacitance between 2 and 5 is (Adi placed at a separation d): dentical metal pla shown. The que 5 is Adjacent place 0.6 10V 5V OV TTTTT 1 2 3 4 5 6 (A) 289A (,36A 0.8

The V versus x plot for six identical metal plates of cross-sectional area A is as shown. The equivalent capacitance between 2 and 5 is (Adjacent plates are placed at a separation d) :

(a) Find the potential difference between the plates of a parallel plate capacitor of capacitance 5muF if a charge +800muC is placed on one plate and- 200muC on another plate. (b) The charege given to plate are as shown. The capacitance between the adjacent plates is C . find the charge on outer surface of plate 3 , and potential difference between plate 1 and 2 . (c) If A is area of each plate and d is separation between adjacent plates, find the charge supplied by battery. (d) Five idential capacitor plates each of area A are arranged such that adjacent plates are at a distance d apart. the plates are connected to a source of emf V as shown. what is the magnitude and nature of charge on plates 1 and 3 respectively?

Determine the pressure difference in tube of non-uniform cross sectional area as shown in figure Delta P = ? d_(1) = 5 cm, V_(1) = 4, d_(2) = 2 cm,V_(2) = ?

A 5V battery with internal resistance 2Omega and a 2V battery with internal resistance 1Omega are connected to a 10Omega resistor as shown in the figure.

A circuit shown in the figure consists of a battery of emf 10V and two capacitance C_(1) and C_(2) of capacitances 1.0muF and 2.0muF respectively. The potential difference V_(A) - V_(B) is 5V

A circuit shown in the figure consists of a battery of emf 10V and two capacitance C_(1) and C_(2) of capacitances 1.0muF and 2.0muF respectively. The potential difference V_(A) - V_(B) is 5V

Resistance of 6 ohm each are connected in the manner shown in the given figure. With the current 0.5 ampere as show in figure. The potential differnce V_A-V_B is

A circuit has a section AB as shown in the fig. With E =10V. C_1= 1.0muF, C_2= 2.0muF and the potential difference V_A–V_B= 5V. The voltage across C_1 is :