A voltmeter consists of a 25(Omega) coil...

A voltmeter consists of a `25(Omega)` coil connected in series with a `575(Omega)`resistor. The coil takes 10mA for full scale deflection. What maximum potential difference can be measured on this voltmeter?

Text Solution

Verified by Experts

`V = `R_eff xx i`
`= 600 xx 10 xx (10^-3) = 6V ` .

Topper's Solved these Questions

ELECTRIC CURRENT IN CONDUCTORS
HC VERMA|Exercise Objective 2|9 Videos
DISPERSION AND SPECTRA
HC VERMA|Exercise Exercises|11 Videos
ELECTRIC CURRENT THROUGH GASES
HC VERMA|Exercise Exercises|23 Videos

Similar Questions

Explore conceptually related problems

A voltmeter consists of a 25Omega coil connected in series with a 575 Omega resistor. The coil takes 10 mA for full-scale deflection. What maximum potential difference can be measured on this voltmeter?

A galvanometer shows full-scale deflection when current of 1 mA is passed through it. Resistance of the coil used in the galvanometer is 100 Omega what maximum potential difference can be measured if it is used as a voltmeter ? How will you modify it to measure potential difference up to 2 V ?

The resistance of a galvanometer coil is 100 Omega . The value of current for full scale deflection in it is 1mA. What should be the value of series resistance to be used to convert it into a voltmeter of 12volt range

The resistance of a galvanometer coil is 100 omega . The value of current for full scale deflection in it is 1mA. What should be the value of series resistance to be used to convert it into a voltmeter of 12volt range

An ammeter is to be constructed which can read currents up to 2.0A. If the coil has a resistance of 25(Omega) and takes 1mA for full-scale deflection, what should be the resistance of the shunt used?

An ammeter is to be constructed which can read currents up to 2.0 A. Iſ the coil has a resistance of 25Omega and takes 1 mA for full-scale deflection, what should be the resistance of the shunt used?

A galvanometer of resistance 40 Omega gives the full scale deflection for a current of 10 m A through it. A resistance of 9960Omega is connected in series with the galvanometer coil. The mximum voltage that can be measured by the voltmeter is

A moving coil galvanometer has resistance 50 Omega and it indicates full deflection at 4 mA current. A voltmeter is made using this galvanometer and a 5 k Omega resistance. The maximum voltage, that can be measured using this voltmeter (in volts) will be __________.

A galvanometer having coil of resistance 100 Omega shows full-scale deflection when 1 mA current is passed through it. What resistance is needed to be connected in series with the coil so that it may be used as a voltmeter which may measure a potential difference of 5 volts?

HC VERMA-ELECTRIC CURRENT IN CONDUCTORS-Exercises

A voltmeter of resistances 400(Omega)is used to measure the potential ...
Text Solution
|
The voltmeter shown in figure reads 18V across the 50(Omega)resistor. ...
Text Solution
|
A voltmeter consists of a 25(Omega) coil connected in series with a 57...
Text Solution
|
An ammeter is to be constructed which can read currents up to 2.0A. If...
Text Solution
|
A voltmeter coil has resistance 50.0(Omega)and a resistor of 1.15k(Ome...
Text Solution
|
The potentiometer wire AB shown in figure is 40 cm long. Where should ...
Text Solution
|
The potentiometer wire AB shown in figure is 50cm long.When AD=30cm, n...
Text Solution
|
A 6-volt battery of negligible internal resistance is connected across...
Text Solution
|
Consider the potentiometer circuit arranged as in figure.The petentiom...
Text Solution
|
Find the charge on the capacitor shown in figure
Text Solution
|
(a) Find the current in the 20(Omega)resistor shown in figure.(b)If a ...
Text Solution
|
Find the charge on the four capacirtors of capacitances 1(mu)F,2(mu)F,...
Text Solution
|
find the potential difference between th point A and B and between the...
Text Solution
|
A capacitance C, a resistance R and an emf (epsilon)are connected in s...
Text Solution
|
A parallel-plate capacitor with plate are 20cm^(2)and plate separation...
Text Solution
|
A capacitor of capacitance 10(mu)F is connected to a battery of emf 2V...
Text Solution
|
A 20(mu)Fcapacitor is joined to a battery of emf 6.0V through a resist...
Text Solution
|
The plates of a capacitor of capacitance 10(mu)F,charged to 60(mu)C,ar...
Text Solution
|
A capacitor of capacitance 8.0(mu)F is connected to a bettery of emf 6...
Text Solution
|
A parallel-plate capacitor of plate area 40 cm^2 and separation betwee...
Text Solution
|