A point sources `S` emitting light of wavelength `600nm` is placed at a very small height `h` above the flat reflecting surface `AB`(see figure).The intensity of the reflected light is`36%` of the intensity.interference firnges are observed on a screen placed parallel to the reflecting surface a very large distance `D` from it.
(A)What is the shape of the interference fringes on the screen?

(B)Calculate the ratio of the minimum to the maximum to the maximum intensities in the interference fringes fromed near the point `P` (shown in the figure) (c) if the intenstities at point `P` corresponds to a maximum,calculate the minimum distance through which the reflecting surface `AB` should be shifted so that the intensity at `P` again becomes maximum.

Answer

A, B, C

Explanation

(a) Because S is a point source, fringes will be circular.
`(I_(max))/(I_(min))=((sqrtI-sqrt(0.36I))/(sqrtI+0.36I))^(2)=((0.4)/(1.6))^(2)=(1)/(16)`
[`:'` If intensity of light falling on P directly from S is I, then the intensity of light falling at P after reflection from AB is 0.36I]

(c) For maximum at P, path difference=`nlamda`
If AB is shifted by a distance x, it will cause an additional path difference of `2x`.
`2x=lamda` (for minimum value of x) `impliesx=(lamda)/(2)=300nm`