Home
Class 11
PHYSICS
A cylindrical vessel is filled with wate...

A cylindrical vessel is filled with water upto a height of 1m. The cross-sectional area of the orifice at the bottom is `(1//400)` that of the vessel.
(a) What is the tiome required to empty the tank through the orifice at the bottom?
(b) What is the time required for the same amount of water to flow out if the water level in tank is maintained always at a height of 1m from orifice?

Text Solution

Verified by Experts

The correct Answer is:
A, B, C

(a) Time taken to empty the tank (has been derived in theory) is
`t=(2A)/(asqrt(2g))sqrt(H)`
Given, `A/a=400`
Substituting the value we have,
`t=(2xx400)/(sqrt(2xx9.8))sqrt(1)`
`=180s=3 min`
(b) Rate of flow of water `Q=a sqrt(2gH)=constant`
Total volume of water `V=AH`
`:.` Time take to empty the tank with constant rate
`t=V/Q=(AH)/(a sqrt(2gH))`
`(400xx1)/(sqrt(2xx9.8xx1))`
`=90s =1.5 min`
Promotional Banner

Topper's Solved these Questions

  • FLUID MECHANICS

    DC PANDEY|Exercise Example 13.1|1 Videos
  • FLUID MECHANICS

    DC PANDEY|Exercise Example 13.2|1 Videos
  • FLUID MECHANICS

    DC PANDEY|Exercise Level 2 Comprehension Based|7 Videos
  • EXPERIMENTS

    DC PANDEY|Exercise Subjective|15 Videos
  • GENERAL PHYSICS

    DC PANDEY|Exercise INTEGER_TYPE|2 Videos

Similar Questions

Explore conceptually related problems

Water is filled in a cylindrical container to a height of 3m . The ratio of the cross-sectional area of the orifice and the beaker is 0.1 . The square of the speed of the liquid coming out from the orifice is (g=10m//s^(2)) .

What is filled in a cylindrical container to a height of 3 m . The ratio of the cross-sectional area of the orifice and the beaker is 0.1 . The square of the speed of the liquid coming out from the orifice is (g = 10 m//s^2) .

A cylindrical vessel of area of cross section A is filled with a liquid up to a height H . A very small hole of area of cross section a is made at the bottom of the vellel. Find the time taken by the vessel to become empty.

In a container, filled with water upto a height h, a hole is made in the bottom. The velocity of water flowing out of the hole is

Water flows out of a small hole in the wall of a large tank near its bottom. What is the speed of efflux of water when height of water level in the tank is 5.0 m ?

A cylindrical vessel of cross section A contains water to a height h. There is a hole in the bottom of radius 'a'. The time in which it will be emptied is:

A cylindrical vessel of hieght h and base area S is filled with water. An orifice of area sltltS is made at the bottom of the vessel. Neglection viscosity find how soon the vessel would be emptied.

The velocity of efflux of a liquid through an orifice in the bottom of a tank does not depend upon

A cylindrical tank with a large diameter is filled with water to a depth D =0.30 m. A hole of cross-sectional area A = 6.2 cm^(2) in the bottom of the tank allows water to drain out. (a) What is the drainage rate in cubic meters per second? (b) At what distance below the bottom of the tank is the cross-sectional area of the stream equal to one half the area of the hole?

DC PANDEY-FLUID MECHANICS-Subjective
  1. A block of mass m is kept over a fixed smooth wedge. Block is attached...

    Text Solution

    |

  2. A cubic body floats on mercury with 0.25 fraction of its volume below ...

    Text Solution

    |

  3. A siphon tube is discharging a liquid of specific gravity 0.9 from a r...

    Text Solution

    |

  4. A long cylindrical tank of cross-sectional area 0.5m^(2) is filled wit...

    Text Solution

    |

  5. A spring is attached to the bottom of an swimming pool, with the axis ...

    Text Solution

    |

  6. A rectangular tank of height 10m filled with water, is placed near the...

    Text Solution

    |

  7. A ball of density d is dropped on to a horizontal solid surface. It bo...

    Text Solution

    |

  8. Thre is an air bubble of radius .0 mm in a liquid of surface tension 0...

    Text Solution

    |

  9. A metal sphere of radius 1 mm and mass 50 mg falls vertically in glyce...

    Text Solution

    |

  10. A wire forming a loop is dipped into soap solution and taken out so th...

    Text Solution

    |

  11. A cylindrical vessel is filled with water upto a height of 1m. The cro...

    Text Solution

    |

  12. A tank with a small orifice contains oil on top of water. It is immers...

    Text Solution

    |

  13. What work should be done in order to sqeeze all water from a horizonta...

    Text Solution

    |

  14. A cylinder is fitted with a piston, beneath which is a spring, as in t...

    Text Solution

    |

  15. A non-viscous liquid of constant density 1000kg//m^3 flows in a stream...

    Text Solution

    |

  16. A glass plate of length 10 cm, breadth 1.54 cm and thickness 0.20 cm w...

    Text Solution

    |

  17. Two narrow bores of diameters 3.0mm and 6.0 mm are joined together to ...

    Text Solution

    |

  18. Two identical soap bubbles each of radius r and of the same surface te...

    Text Solution

    |

  19. A soap bubble of radius r and surface tension T is given a potential V...

    Text Solution

    |

  20. If the radius and surface tension of a spherical soap bubble are 'R' a...

    Text Solution

    |