A sinusoidal voltage of peak value 200 v...

A sinusoidal voltage of peak value `200` volts is connected to a diode and resistor `R` in the circuit shown so that half wave rectification occurs. If the forward resistance of the diode is negligible compared to `R` the `rms` voltage (in volt) across `R` is approximately

`200`

`100`

`200/(sqrt(3))`

`280`

Text Solution

Verified by Experts

The correct Answer is:

`V_(rms)=(V_(0))/2=200/2=100V`

Topper's Solved these Questions

SEMICONDUCTOR ELECTRONICS
A2Z|Exercise Junction Transistor|47 Videos
SEMICONDUCTOR ELECTRONICS
A2Z|Exercise Digital Electronics|40 Videos
SEMICONDUCTOR ELECTRONICS
A2Z|Exercise Junction Diode|57 Videos
NUCLEAR PHYSICS
A2Z|Exercise Section D - Chapter End Test|29 Videos
SOURCE AND EFFECT OF MAGNETIC FIELD
A2Z|Exercise Section D - Chapter End Test|30 Videos

Similar Questions

Explore conceptually related problems

A sinusiodal voltage of rms value 200 volt is connected to the diode and capacitor C in the shown so that half wave reactification occurs. The final potential difference in volt across C is

A sinusoidal voltage of rms value 200 volt is connected to a diode and a resistor R in the circuit as shown in Fig., so that half wave rectification occurs. If the diode is ideal, what is the rms voltage across R? If resistor R is replaced by capactior of capacitance C, find the potential difference across C.

An a.c. voltage of peak value 20 V is connected in series with a silicon diode and a load resistance of 500 G. The forward resistance of the diode is 10 G and the barrier voltage is 0.7 V. Find the peak current through diode and the peak voltage across the load.

A sinusoidal voltage of rms value 100V is connected to an ideal function diode as shown in figure. The final potential difference across the capacitor will be

A sinusoidal voltage of amplitude 5V is applied to resistance of 500 Omega . The r.m.s. current in the circuit is

In the circuit shown, tp across the 2R resistor muhe voltage drost be

An AC voltage with peak value 20 V is connected in series a diode and load resistance of 500 omega exists across the diode calculate the peak current through the diode and peak voltage across the load resistance what will be the answer if the diode is ideal

In the given circuit, the diode has a forward resistance of 8 Ω and infinite backward resistance. The value of R is :-

A2Z-SEMICONDUCTOR ELECTRONICS-Diode In Circuits

In the circuit, if the forward voltage drop for the diode is 0.5 V, th...
Text Solution
|
Current in the circuit will be
Text Solution
|
The diode used in the circuit shown in the figure has a constant volta...
Text Solution
|
A sinusoidal voltage of peak value 200 volts is connected to a diode a...
Text Solution
|
The junction diode in the following circuit requires a minimum current...
Text Solution
|
In the circuit given below, V(t) is the sinusoidal voltage source, vol...
Text Solution
|
The peak voltage in the output of a half-wave diode rectifier fed with...
Text Solution
|
In the following circuits PN-junction diodes D(1), D(2) and D(3) are i...
Text Solution
|
The circuit shown in following figure contains two diode D(1) and D(2)...
Text Solution
|
Find V(AB)
Text Solution
|
A diode is connected to 220V (rms) ac in series with a capacitor as sh...
Text Solution
|
In the circuit shown in figure the maximum output voltage V(0) is
Text Solution
|
In the following circuit find I(1) and I(2)
Text Solution
|
Ge and Si diodes conduct at 0.3 V and 0.7 V respectively. In the follo...
Text Solution
|
In the following circuit I(1) and I(2) are respectively
Text Solution
|
In space charge limited region, the plate current in a diode is 10 mA ...
Text Solution
|
When a silicon PN junction is in forwards biased condition with series...
Text Solution
|
In the following circuit the equivalent resistance between A and B is
Text Solution
|
In the following circuit of PN junction diodes D(1),D(2) and D(3) are ...
Text Solution
|
A waveform shown when applied to the following circuit will produce wh...
Text Solution
|