Home
Class 12
PHYSICS
The balanced position of meter bridge is...

The balanced position of meter bridge is …… interchanging the positions of battery and galvanometer

Text Solution

Verified by Experts

The correct Answer is:
not effective or remain unchanged
Doubtnut Promotions Banner Mobile Dark
|

Topper's Solved these Questions

  • CURRENT ELECTRICITY

    PRADEEP|Exercise Problems for Practice (A)|1 Videos
  • CURRENT ELECTRICITY

    PRADEEP|Exercise Problems for Practice (B)|2 Videos
  • CURRENT ELECTRICITY

    PRADEEP|Exercise Assertion and Reason|4 Videos
  • COMMUNICATION SYSTEMS

    PRADEEP|Exercise MODEL TEST PAPER-2|9 Videos
  • DUAL NATURE OF RADIATION AND MATTER

    PRADEEP|Exercise Exercise|191 Videos

Similar Questions

Explore conceptually related problems

Which are coorect statement ? (1) The Wheatstone bridge is most sensitive when all the four resistances are of the same order (2) Kirchhoffs first law (for currents meeting at a junction in an electric circuit) expresses the conservation of charge. (3) The rheostat can be used as a potential divider. (4) In a balanced Wheatstone bridge, interchanging the positions of galvanometer and cell affects the balance of the bridge.

What is the effect of interchanging the position of cell and galvanometer in a Wheatstone bridge ?

Knowledge Check

  • The positions of the second and the eighth digits of the number 39128564areinterchanged. Similarly, the positions of the fourth and the fifth digits are interchanged. The positions of the first and the six digits are interchanged and the positions of the third and the seventh digits are interchanged. Which of the following will be the third digit to the left of 3 after the rearrangement ?

    A
    2
    B
    4
    C
    6
    D
    8
  • The Wheatstone bridge shown in the above figure is balanced. If the positions of the cell C and the galvanometer G are now interchanged, G will show zero deflection

    A
    in all cases
    B
    only if all the resistances are qual
    C
    only if `R_(1)=R_(3)` and `R_(2)=R_(4)`
    D
    only if `R_(1)//R_(3)=R_(2)//R_(4)`
  • The Wheatstone's bridge shown in the Fig. A2.5 is balanced. If the positions of the cell C and the galvanometer F are now interchanged, G will show zero deflection

    A
    in all cases
    B
    only if all the resistances
    C
    only if `R_1 = R_3 and R_2= R_1`
    D
    only if `R_1//R_3 = R_2//R_4`
  • Similar Questions

    Explore conceptually related problems

    In the given circuit a bridge is shown in the balanced state.The meter bridge wire has a resistance of 1 Omega cm^(-1) .Calculate the unknown resistance X and the current drawn from the battery of negligible internal resistence. If the magnitude the position of galvanometer and the cell, how it will affect the position of the galvanometer ?

    The balance point in a meter bridge is 45cm .If the resistances in the gaps are interchanged the new balance point is

    (i) In a metre bridge, the balance point is found to be at 39.5 cm from the end A, when the resistor Y is of 12.5 Omega . Determine the resistance of X. Made of thick copper strips? (ii). Determine the balance point of the bridge above if X and Y are interchanged. (iii). what happens if the galvanometer and cell are interchanged at the balance point of the bridge ? Would the galvanometer show any current?

    (a) In a metre bridge the balance point is found to be at 39.5 cm from the end A, when the resistor Y is of 12.5 Omega . Determine the resistance of X. Why are the connections between resistors in a Wheatstone or metre bridge made of thick copper strips ? (b) Determine the balance point of the bridge above if X and Y are interchanged. (c ) What happens if the galvanometer and cell are interchanged at the balance point of the bridge? Would the galvanometer show any current ?

    Assertion (A): In balanced condition of a Wheatstone bridge, there is no current flow through the galvanometer. Reason (R ): The potential of point B and D are same.