Home
Class 12
PHYSICS
In the experiment of Ohm's law, when pot...

In the experiment of Ohm's law, when potential difference of 10.0 V is applied, current measured is 1.00 A. If length of wire is found to be 10.0cm and diameter of wire 2.50 mm, then find maximum permissible percentage error in resistivity.

A

`1.8%`

B

`10.2%`

C

`3.8%`

D

`5.75%`

Text Solution

Verified by Experts

The correct Answer is:
C

`((dp)/(p))_(max)`
`=2((0.01)/(2.50))+((0.1)/(10.0))+((0.1)/(10.0))+((0.01)/(1.00))`
`=3.8%`
Promotional Banner

Topper's Solved these Questions

  • EXPERIMENTAL PHYSICS

    NARAYNA|Exercise Comprehension type|6 Videos
  • EXPERIMENTAL PHYSICS

    NARAYNA|Exercise Subjective type|6 Videos
  • ELECTROSTATICS AND GAUSS LAW

    NARAYNA|Exercise Intergers type question|11 Videos
  • MAGNETISM

    NARAYNA|Exercise LEVEL-II (H.W)|24 Videos

Similar Questions

Explore conceptually related problems

In the experiment of Ohm's law, a potential difference of 5.0 V is applied across the end of a conductor of length 10.0 cm and diameter of 5.00 mm. The measured current in the conductor is 2.00 A. The maximum permissible percentage error in the resistivity of the conductor is :

A potential difference of 100 V is applied across a wire of resistance 50 Omega for one minute. Find the heat produced in joule.

A potential difference of 100 V is applied across a wire for two minutes. If the current through the wire is 0.1 A , find the heat produced in houle .

In ohm's law experiment potential drop across a resistance was measured as v = 5.0 volt and current was measured as I = 2.0amp If least count of the volmeter and ammeter are 0.1V and 0.01A respectively then find the maximum permissible error in resistance .

In an experiment, current measured is, 1 = 10.0 A , potential difference measured is V = 100.0 C , length of the wire is 31.4 cm and the diameter of the wire 2.00 mm (all in correct significant figures). Find resistivity of the wire in correct significant figures. [Take pi = 3.14 , exact]. (a) (b) (c) (d) .

In u-v method to find focal length of a concave mirror, if object distance is found to be 10.0 cm and image distance was also found to be 10.0 cm , then find maximum permissible error in (f).

The potential difference across the ends of a wire is found to be (100pm2) volt and the current flowing in the wire is found to be (10pm0.1) A. What is the maximum percentage error in the measurement of resistance?

The potential difference across the ends of a wire is found to be (100pm2) volt and the current flowing in the wire is found to be (10pm0.1) A. What is the maximum percentage error in the measurement of resistance?

In Searle's exp to find Young's modulus, the diameter of wire is mesured as D=0.05cm length of wire is L=125cm , and when a weight, m=20.0 kg is put, extension in wire was found to be 0.100cm . Find maximum permissible percentage error in Young's modulus ( Y )

If the measured value of resistance R = 1.05 Omega , wire diameter d = 0.60 mm , and length l = 75.3 cm , then find the maximum permissible error in resistivity , rho = ( R ( pi d^(2) // 4)) /( l) .

NARAYNA-EXPERIMENTAL PHYSICS-Level-VI(Single answer)
  1. If we use very thin and long wire, then

    Text Solution

    |

  2. If accidentally the calorimeter remained open to atmosphere was for so...

    Text Solution

    |

  3. If a tuning fork of frequency (340 pm 1 %) is used in the resonance tu...

    Text Solution

    |

  4. If emf of battery is 100V, then what was the resistance of Rheostat ad...

    Text Solution

    |

  5. I v//s V curve for a non Ohmic resistance is shown. The dynamic resist...

    Text Solution

    |

  6. If by mistake Ammeter is connected parallel to the resistance then i-V...

    Text Solution

    |

  7. If by mistake Ammeter is connected parallel to the resistance then i-V...

    Text Solution

    |

  8. In the experiment of Ohm's law, when potential difference of 10.0 V is...

    Text Solution

    |

  9. From some instruments current measured is I=10.0amp, potential differe...

    Text Solution

    |

  10. In the previous question, maximum permissible error is resitivity and ...

    Text Solution

    |

  11. If resistance S in RB=300Omega, then the balanced length is found to b...

    Text Solution

    |

  12. In the previous question, if R and S are interchanged, balanced point ...

    Text Solution

    |

  13. In a meter bridge, null point is at l=33.7cm, when the resistance S is...

    Text Solution

    |

  14. In u-v method to find focal length of a concave mirror, if object dist...

    Text Solution

    |

  15. To verify Ohm's law, a student is provided with a test resistor R(T), ...

    Text Solution

    |

  16. A vernier calipers has 1mm marks on the main scale. It has 20 equal di...

    Text Solution

    |

  17. A meter bridge is set up as shown, to determine an unknown resistance ...

    Text Solution

    |

  18. The density of a solid ball is to be determined in an experiment. The ...

    Text Solution

    |

  19. In the determination if Young's modulus ((Y = (4MLg)/(pild^(2)) by usi...

    Text Solution

    |

  20. A student is performing the experiment of resonance column. The diamet...

    Text Solution

    |