Home
Class 12
PHYSICS
A five wire potentiometer is connected t...

A five wire potentiometer is connected to an accumulator of e.m.f 2.2 V and `1Omega` internal resistance. The potentiometer wire has resistance `1Omega` per metre. What is the maximum voltage that you can measure with this particular arrangement of potentiometer? What length of this potentiometer will balance the e.m.f of a daniell cell (e.fm.f `=1.18V`)? what resistance to balance this cell exactly at the centre of the last wire?

Text Solution

Verified by Experts

put `R_(1)=1018` (one thousand times the e.m.f of Cd-cell), adjust `R_(2)` till no deflection in the galvanometer `R_(2)=972Omega,5.1m)`
Promotional Banner

Topper's Solved these Questions

  • CURRENT ELECTRICITY

    NARAYNA|Exercise Level 5|42 Videos
  • COMMUNICATION SYSTEM

    NARAYNA|Exercise Level-II(H.W)|25 Videos
  • DUAL NATURE OF RADIATION AND MATTER

    NARAYNA|Exercise ASSERTION AND REASON|15 Videos

Similar Questions

Explore conceptually related problems

A cell of e.m.f. 2 V and negligible internal resistance is connected to a potentiometer wire of resistance 10 Omega and length 4 m. The potential difference per unit length (potential gradient ) of the wire is

A battery of emf 26V and internal resistance 0.4 ohm is connected to a resistance of 10ohm and a potentiometer wire of length 10m. What is the potential gradient on the wire if the resistance of the potentiometer wire is 5 ohm –

The wire of potentiometer has resistance 4 Omega and length 1m. It is connected to a cell of e.m.f. 2V and internal resistance 1 Omega . The current flowing through the potentiometer wire is

A battery of enf 2 V internal resistance 1 Omega is used to send a current through a potentiometer wire of length 200 cm and resistance 4 Omega What length of the potentiometer wire will be required to balace a Daniell cell of enf 1.08 V?

In a potentiometer circuit, the emf of driver cell is 2V and internal resistance is 0.5 Omega . The potentiometer wire is 1m long . It is found that a cell of emf 1V and internal resistance 0.5 Omega is balanced against 60 cm length of the wire. Calculate the resistance of potentiometer wire.

In the primary circuit of a potentiometer, a cell of E.M.F 1 V and a rheostat of 15 Omega are connected in series. If the resistance of the potentiometer wire is 10 Omega the minimum voltage at the ends of the wire (in V) will be

The potentiometer wire of resistance R is connected in series with a cell of e.m.f. E and of resistance R_(h) . The current flowing through the potentiometer wire is

A cell of e.m.f. 4 V and of negligible internal resistance is connected in series with a potentiometer wire of length 400 cm. The e.m.f. of a Leelanche cell is found to be balacned at 150 cm from the positive end of the potentiometer wire. What is the e.m.f. of the Leclanche cell ?

NARAYNA-CURRENT ELECTRICITY-Level 6
  1. A galvanometer with a coil resistance of 100Omega shows a full-scale d...

    Text Solution

    |

  2. When the modified galvanometer of previous question is connected acros...

    Text Solution

    |

  3. An ammeter and a voltmeter are connected in series to a battery of emf...

    Text Solution

    |

  4. It is required to measure the resistance of a circuit operating at 120...

    Text Solution

    |

  5. The resistance of a potentiometer wire 8 m long is 8 ohm. A high resis...

    Text Solution

    |

  6. The terminals of a cell are cnnected to resistance R and the falll of...

    Text Solution

    |

  7. An accumulator of emf 2 V and negligible internal resistance is connec...

    Text Solution

    |

  8. A certain thermocouple (treat it as a seat of e.m.f) which has a total...

    Text Solution

    |

  9. A 10 m wire potentiometer has resistance 10Omega and is connected to a...

    Text Solution

    |

  10. A five wire potentiometer is connected to an accumulator of e.m.f 2.2 ...

    Text Solution

    |

  11. A potentiometer wire of length 1000 cm has a resistance of 10 ohms. It...

    Text Solution

    |

  12. Twelve identical resistances arranged on all edges of a cube. The resi...

    Text Solution

    |

  13. Twelve straight uniform wires of length a and resistance R are joined ...

    Text Solution

    |

  14. Twelve straight uniform wires of length a and resistance R are joined ...

    Text Solution

    |

  15. Four resistors R(1),R(2),R(3) and R(4) are connected between two termi...

    Text Solution

    |

  16. Four resistors R(1),R(2),R(3) and R(4) are connected between two termi...

    Text Solution

    |

  17. Four resistors R(1),R(2),R(3) and R(4) are connected between two termi...

    Text Solution

    |

  18. In the circuit shown, the resistances are given in ohms and the batter...

    Text Solution

    |

  19. In circuit shown below, the resistance are given in ohms and the batte...

    Text Solution

    |

  20. In the circuit shown, the resistances are given in ohms and the batter...

    Text Solution

    |