The upper end of a wire of diameter 12mm...

The upper end of a wire of diameter 12mm and length 1m is clamped and its other end is twisted through an angle of `30^(@)`. The angle of shear is

`18^(@)`

`0.8^(@)`

`36^(@)`

`0.36^(@)`

Text Solution

Verified by Experts

Topper's Solved these Questions

MECHANICAL PROPERTIES OF FLUIDS
DISHA|Exercise Physics|44 Videos
MOTION IN A PLANE
DISHA|Exercise PHYSICS|45 Videos

Similar Questions

Explore conceptually related problems

The upper end of a wire of radius 4 mm and length 100 cm is clamped and its other end is twisted through an angle of 30^@ . Then angle of shear is

The upper end of a wire of radius 4mm and lengh 100cm is clamped and its other end if twiced through an angle of 60^(@) the angle of shear si

The upper end of a wire 1 meter long and 2 mm radius is clamped. The lower end is twisted through an angle of 45^(@) . The angle of shear is

Find the elastic deformation energy of a steel rod whose one end is fixed and the other is twisted through an angle varphi=6.0^@ . The length of the rod is equal to l=1.0m , and the radius to r=10mm .

A stick of mass m and length l is pivoted at one end and is displaced through an angle theta. The increase in potential energy is

A long wire hangs vertically with its upper end clamped. A torque of 6 N-m, applied to its free twists it through an angle of 30^(@) . The potential energy of the twisted wire is

Two cylinders A and B of the same matieral have same length, their radii being in the ratio of 1:2 repectively. They are joined end to end as shown in figure. The upper end of A is rigidly fixed. The lower end of B is twised through an angle theta , the angle of twist of the cylinder A is:

A long wire hangs vertically with its upper end clamped, when a torque of 4.5 Nm is applied to free end through an angle of 10^(@) . Then work done by the twisted wire is,

DISHA-MECHANICAL PROPERTIES OF SOLIDS-PHYSICS

Two wires A and B of same material and of equal length with the radii ...
Text Solution
|
A material has Poisson ratio 0.5. If a rod of material has a longitudi...
Text Solution
|
The upper end of a wire of diameter 12mm and length 1m is clamped and ...
Text Solution
|
The pressure on an object of bulk modulus B undergoing hydraulic compr...
Text Solution
|
A structural steel rod has a radius of 10 mm and length of 1.0 m. A 10...
Text Solution
|
A beam of metal supported at the two edges is loaded at the centre. Th...
Text Solution
|
When a 4 kg mass is hung vertically on a light string that obeys Hooke...
Text Solution
|
The length of a metal wire is l(1) when the tension in it is T(1) and ...
Text Solution
|
The bulk moduli of ethanol, mercury and water are given as 0.9, 25 "an...
Text Solution
|
The graph given is a stress-strain curve for
Text Solution
|
A metal rod of Young's modulus 2xx10^(10)Nm^(-2) undergoes an elastic ...
Text Solution
|
Two wires of the same material and length but diameters in the ratio 1...
Text Solution
|
The length of an elastic string is a metre when the longitudinal tens...
Text Solution
|
A force of 103 newton, stretches the length of a hanging wire by 1 mil...
Text Solution
|
A steel wire of length l and cross sectional area A is stretched by 1 ...
Text Solution
|
The adjacent graph shows the estension (Deltal) of a wire of length 1m...
Text Solution
|
If a rubber ball is taken at the depth of 200 m in a pool, its volume ...
Text Solution
|
A ball falling in a lake of depth 200 m shows a decrease of 0.1% in i...
Text Solution
|
The diagram shows a forc-extension graph for a rubber band. Consider...
Text Solution
|
The Poisson’s ratio of a material is 0.5. If a force is applied to a w...
Text Solution
|