The number of turns of primary and secon...

The number of turns of primary and secondary coils of a transformer are 5 and 10 respectively and the mutual inductance of the tranformar is 25 henry. Now the number of turns in the primary and secondary of the transformar are made 10 and 5 respectivaly. The mutual inductance of the transformar in henry will be

6.25

12.5

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

ELECTRO MAGNETIC INDUCTION
ERRORLESS |Exercise OT|3 Videos
ELECTRO MAGNETIC INDUCTION
ERRORLESS |Exercise Motional EMI|1 Videos
CURRENT ELECTRICITY
ERRORLESS |Exercise Self Evaluation Test -19|23 Videos
ELECTRON, PHOTON, PHOTOELECTRIC EFFECT AND X-RAYS
ERRORLESS |Exercise Self Evaluation Test|3 Videos

Similar Questions

Explore conceptually related problems

The number of turns in primary and secondary coils of a transformer is 50 and 200, respectively. If the current in the primary coil is 4 A, then current in the secondary coil is

the number of turns in primary and secondary coils of a transformer are 100 and 20 respectively. If an alternating potential of 200 volt is applied to the primary, the induced potential in secondary will be

If number of turns in primary and secondary coils is increased to two times each, the mutual inductance

The number of turns in the primary and secondary coils of a transformer are 200 and 800 respectively. If the voltage developed across the secondary is 240 V, then the potential difference across each turn of the primary will be

The number of turns in secondary coil of a transformer is 100 times the number of turns in primary coil. What is the transformer ratio ?

The number of turns in the primary and secondary coils of a transformer are 100 and 300 respectively. If a 50 V, 50 Hz, a.c. supply is applied to the primary coil of the transformer, then the P.D. Per turn of the secondary will be

In a transformer, the number of turns in primary coil and secondary coil are 5 and 4 respectively. If 240 V is applied on the primary coil, then the ratio of current in primary and secondary coil is

ERRORLESS -ELECTRO MAGNETIC INDUCTION-SET

The number of turns of primary and secondary coils of a transformer ar...
Text Solution
|
The figure shows four wire loops, with edge length of either L or 2L. ...
Text Solution
|
A circular coil and a bar magnet placed nearby are made to move in the...
Text Solution
|
A square coil ABCD lying in x-y plane with its centre at origin. A lon...
Text Solution
|
A short magnet is allowed to fall from rest along the axis of a horizo...
Text Solution
|
The horizontal component of the earth's magnetic field at a place is 3...
Text Solution
|
A copper disc of radius 0.1 m rotates about its centre with 10 revolut...
Text Solution
|
A coil of Cu wire (radius r, self-inductance L) is bent in two concen...
Text Solution
|
In which of the following circuits is the current maximum just after t...
Text Solution
|
A small coil is introduced between the poles of an electromagnet so th...
Text Solution
|
Two circular coils A and B are facing each other as shown in figure. T...
Text Solution
|
A conductuing loop having a capacitor is moving outward from the magne...
Text Solution
|
A straight wire of length L is bent into a semicircle. It is moved in ...
Text Solution
|
If in a coil rate of change of area is (5meter^(2))/(milli second)and ...
Text Solution
|
In series with 20 ohm resitor a 5 henry inductor is placed. To the com...
Text Solution
|
Two circular coils P & Q are coaxially & carry currents I1 and I2 resp...
Text Solution
|
The phase difference between the flux linkage and the induced e.m.f. i...
Text Solution
|
A pair of parallel conducting rails lie at right angle to a uniform ma...
Text Solution
|
The magnetic field in the cylindrical region shown in figure increase ...
Text Solution
|
An aircraft with a wingspan of 40 m flies a speed of 1080 km hr(1) in ...
Text Solution
|
A hundred turns of insulated copper wire are wrapped around an iron cy...
Text Solution
|