A step up transformer connected to a 220...

A step up transformer connected to a `220V AC` line is to supply `22 kV` for a neon sign in secondary circuit. In primary circuit a fuse wire is connected which is to blow when the current in the secondary circuit exceeds `10mA`. The turn ratio of the transformer is

100

150

200

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

ELECTRO MAGNETIC INDUCTION
ERRORLESS |Exercise OT|3 Videos
ELECTRO MAGNETIC INDUCTION
ERRORLESS |Exercise Motional EMI|1 Videos
CURRENT ELECTRICITY
ERRORLESS |Exercise Self Evaluation Test -19|23 Videos
ELECTRON, PHOTON, PHOTOELECTRIC EFFECT AND X-RAYS
ERRORLESS |Exercise Self Evaluation Test|3 Videos

Similar Questions

Explore conceptually related problems

A step - up transformer operates on 220V line and supplies 22A .The ratio of primary and secondary winding is 11:50. The output voltage in the secondary is

A slep-up transformer operates on 220 V line and supplies 2.2 A. The ratio of primary and secondary winding is 11 : 50, The output voltage in the secondary is

An ideal transformer is connected to a 250 V AC mains and its output voltage is 25 V . This transformer is then used to light a bulb with ratings 60 W , 25 V. Calculate the current in the primary coil of the circuit.

A 44 mH inductor is connected to 220 V, 50 Hz ac supply. The rms value of the current in the circuit is

In a stepup transformer, the ratio of number of turns in primary and secondary coils is 1 : 10 . What voltage will develop in the secondary if the primary is connected to 220 V mains ? If the current drawn from the secondary is 2A, calculate the current through the primary

A transformer is used to reduce the main supply of 220V to 22V. If the currents in the primary and secondary are 2A and 15 A respectively, then the efficiency of the transformer is

ERRORLESS -ELECTRO MAGNETIC INDUCTION-SET

A step up transformer connected to a 220V AC line is to supply 22 kV f...
Text Solution
|
The figure shows four wire loops, with edge length of either L or 2L. ...
Text Solution
|
A circular coil and a bar magnet placed nearby are made to move in the...
Text Solution
|
A square coil ABCD lying in x-y plane with its centre at origin. A lon...
Text Solution
|
A short magnet is allowed to fall from rest along the axis of a horizo...
Text Solution
|
The horizontal component of the earth's magnetic field at a place is 3...
Text Solution
|
A copper disc of radius 0.1 m rotates about its centre with 10 revolut...
Text Solution
|
A coil of Cu wire (radius r, self-inductance L) is bent in two concen...
Text Solution
|
In which of the following circuits is the current maximum just after t...
Text Solution
|
A small coil is introduced between the poles of an electromagnet so th...
Text Solution
|
Two circular coils A and B are facing each other as shown in figure. T...
Text Solution
|
A conductuing loop having a capacitor is moving outward from the magne...
Text Solution
|
A straight wire of length L is bent into a semicircle. It is moved in ...
Text Solution
|
If in a coil rate of change of area is (5meter^(2))/(milli second)and ...
Text Solution
|
In series with 20 ohm resitor a 5 henry inductor is placed. To the com...
Text Solution
|
Two circular coils P & Q are coaxially & carry currents I1 and I2 resp...
Text Solution
|
The phase difference between the flux linkage and the induced e.m.f. i...
Text Solution
|
A pair of parallel conducting rails lie at right angle to a uniform ma...
Text Solution
|
The magnetic field in the cylindrical region shown in figure increase ...
Text Solution
|
An aircraft with a wingspan of 40 m flies a speed of 1080 km hr(1) in ...
Text Solution
|
A hundred turns of insulated copper wire are wrapped around an iron cy...
Text Solution
|