A transformer with efficiency 80% works ...

A transformer with efficiency `80%` works at `4 kW` and `100 V`. If the secondary voltage is `200 V`, then the primary and secondary currents are respectively

`40 A, 16 A`

`16 A, 40 A`

`20 A, 40A`

`40 A, 20 A`

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

ELECTRO MAGNETIC INDUCTION
ERRORLESS |Exercise OT|3 Videos
ELECTRO MAGNETIC INDUCTION
ERRORLESS |Exercise Motional EMI|1 Videos
CURRENT ELECTRICITY
ERRORLESS |Exercise Self Evaluation Test -19|23 Videos
ELECTRON, PHOTON, PHOTOELECTRIC EFFECT AND X-RAYS
ERRORLESS |Exercise Self Evaluation Test|3 Videos

Similar Questions

Explore conceptually related problems

A transformer has an efficiency of 80%. It works at 4 kW, 100 V. If the secondary voltage is 240 V, Calculate the primary and secondary currents.

A transformer has an efficiency of 80%. It works at 4 kW and 100 V. If secondary voltage is 240 V, the current in primary coil is

A transformer has an efficiency of 80% and works at 100 volt and 4 kw. If the secondary voltage is 240 V. The current in secondary is

A transormer has an efficiency of 80%. It is connectes to a power input of 5 kW at 200 V. It the secondary voltage is 250 V, the primary and secondary currents are respectively

A transformer has an efficiency of 80%. It delivers 2kW output power at 100 V primary and 240 V secondary voltages. Calculate primary and secondary currents

The efficiency of a transformer is 98%. The primary voltage and current are 200 V and 6A . If the secondary voltage is 100 V , the secondary current

A transformer of efficiency 90% has turns ratio 10 : 1. If the voltage across the primary is 220 V and current in the primary is 0.5 A, then the current in secondary is

A transformer having efficiency of 80% is working on 200 V and 2 kW power supply. If the current in the secondary coil is 8A, the voltage across the secondary coil and the current in the primary coil respectively are

ERRORLESS -ELECTRO MAGNETIC INDUCTION-SET

A transformer with efficiency 80% works at 4 kW and 100 V. If the seco...
Text Solution
|
The figure shows four wire loops, with edge length of either L or 2L. ...
Text Solution
|
A circular coil and a bar magnet placed nearby are made to move in the...
Text Solution
|
A square coil ABCD lying in x-y plane with its centre at origin. A lon...
Text Solution
|
A short magnet is allowed to fall from rest along the axis of a horizo...
Text Solution
|
The horizontal component of the earth's magnetic field at a place is 3...
Text Solution
|
A copper disc of radius 0.1 m rotates about its centre with 10 revolut...
Text Solution
|
A coil of Cu wire (radius r, self-inductance L) is bent in two concen...
Text Solution
|
In which of the following circuits is the current maximum just after t...
Text Solution
|
A small coil is introduced between the poles of an electromagnet so th...
Text Solution
|
Two circular coils A and B are facing each other as shown in figure. T...
Text Solution
|
A conductuing loop having a capacitor is moving outward from the magne...
Text Solution
|
A straight wire of length L is bent into a semicircle. It is moved in ...
Text Solution
|
If in a coil rate of change of area is (5meter^(2))/(milli second)and ...
Text Solution
|
In series with 20 ohm resitor a 5 henry inductor is placed. To the com...
Text Solution
|
Two circular coils P & Q are coaxially & carry currents I1 and I2 resp...
Text Solution
|
The phase difference between the flux linkage and the induced e.m.f. i...
Text Solution
|
A pair of parallel conducting rails lie at right angle to a uniform ma...
Text Solution
|
The magnetic field in the cylindrical region shown in figure increase ...
Text Solution
|
An aircraft with a wingspan of 40 m flies a speed of 1080 km hr(1) in ...
Text Solution
|
A hundred turns of insulated copper wire are wrapped around an iron cy...
Text Solution
|