The diode used in the circuit shown in t...

The diode used in the circuit shown in the figure has a constant voltage drop of `0.5 V` at all currents and a maximum power rating fo `100` milliwatts. What should be the value of the resistor `R`, connected in series with the diode for obtaining maximum current?

`1.5 Omega`

`5 Omega`

`6.67 Omega`

`200 Omega`

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

ELECTRONICS
ERRORLESS |Exercise Digital Electronics|2 Videos
ELECTRONICS
ERRORLESS |Exercise Valve Electronics (Diode and Triode)|3 Videos
ELECTRON, PHOTON, PHOTOELECTRIC EFFECT AND X-RAYS
ERRORLESS |Exercise Self Evaluation Test|3 Videos
ELECTROSTATICS
ERRORLESS |Exercise Ordinary Thinking Objective Questions (Electric Flux and Gauss.s Law)|28 Videos

Similar Questions

Explore conceptually related problems

The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating of 100 mW. What should be the value of the resistor R, connected in series with the diode, for obtaining maximum current put less I. ?

The diode used in the circuit shown in the adjacent figure has a constant voltage drop of 0.5V at all currents and a maximum power rating of 100mW.What should be the value of resistor R connected in series with the diode for obtaining maximum current?

The diode used at a constant potential drop of 0.5 V at all currents and maximum power rating of 100 mW. What resistance must be connected in series diode, so that current in circuit is maximum?

In the circuit, if the forward voltage drop for the diode is 0.5 V , the current will be

In the circuit shown in figure, if the A diode forward voltage drop is 0.3 V, the voltage difference between A and B is

When a diode is forward biased, it has a voltage drop of 0.5 V. The safe limit of current through the diode is 10 mA. If a battery of emf 1.5 V is used in the circuit, the value of minimum resistance to be connected in series with the diode so that the current does not exceed the safe limit is :

In the circuit shown in figure, if the diode forward voltage drop is 0.3 V, then the voltage difference between A to B is,

ERRORLESS -ELECTRONICS-Selv Evaluation Test

The diode used in the circuit shown in the figure has a constant volta...
Text Solution
|
In a pure silicon (n(i)=10^(16)//m^(3)) crystal at 300K, 10^(21) atoms...
Text Solution
|
In the Boolean algebra bar(A).bar(B) equals is :-
Text Solution
|
In the given circuit as shown the two input waveform A and B are appli...
Text Solution
|
Two identical capacitors A and B are charged to the same potential V a...
Text Solution
|
In transistor, forward bias is always smaller than the reverse bias. T...
Text Solution
|
In NPN transistor, if doping in base region is increased then collecto...
Text Solution
|
In the following circuit I(1) and I(2) are respectively
Text Solution
|
In space charge limited region, the plate current in a diode is 10 mA ...
Text Solution
|
A triode has a plate resistance of 10 k Omega and amplification factor...
Text Solution
|
Pure sodium (Na) is a good conductor of electricity because the 3s and...
Text Solution
|
Would there be any advantage to adding n-type or p-type impurities to ...
Text Solution
|
In the following common emitter circuit if beta=100, V(CE)=7 V, V(BE)=...
Text Solution
|
When a battery is connected to a P-type semiconductor with a metallic ...
Text Solution
|
Is the ionisation energy of an isolated free atom different from the i...
Text Solution
|
In the following circuit, a voltmeter V is connected across a lamp L. ...
Text Solution
|
For given electric voltage signal dc value is
Text Solution
|
When a silicon PN junction is in forwards biased condition with series...
Text Solution
|
In the following circuit the equivalent resistance between A and B is
Text Solution
|
In the following circuit of PN junction diodes D(1),D(2) and D(3) are ...
Text Solution
|
In circuit in following figure the value of Y is-
Text Solution
|