The increase in pressure required to dec...

The increase in pressure required to decrease the 200 L volume of a liquid by 0.008 % in kPa is (Bulk modulus of the liquid = 2100 M Pa is )

A

8.4

B

84

C

92.4

D

168

Text Solution

Verified by Experts

Topper's Solved these Questions

MECHANICAL PROPERTIES OF SOLIDS
AAKASH INSTITUTE|Exercise Assignment(Section-D)|12 Videos
MECHANICAL PROPERTIES OF SOLIDS
AAKASH INSTITUTE|Exercise Assignment(Section-B)|24 Videos
MECHANICAL PROPERTIES OF FLUIDS
AAKASH INSTITUTE|Exercise SECTION - J|9 Videos
Mock test 03
AAKASH INSTITUTE|Exercise EXAMPLE|37 Videos

Similar Questions

Explore conceptually related problems

An increases in pressure required to decreases the 200 litres volume of a liquid by 0.004% in container is: (bul modulus of the liquid =2100MPa )

The increase in pressure in kPa requried to decrease 200 litre volume of a liquid by 0.004% is (bulk modulus of the liquif = 2100 Mpa)

The increase in pressure required to decrease volume by 0.005% of 150 litre liquid (in kPa) is (Bulk modulus of liquid, B=3*10^9 N/m^2 )

What increase in pressure is required to decrease the volume of 200 litre of water by 0.004 percent? Given bulk modulus of water is 2100 Mpa.

Find the increase in pressure required to decrease the volume of given mercury by 0.001 % [ Bulk modulus of mercury = 2.8 xx 10^(10) N//m^(2)]

The extra pressure required to decrease the volume of a liquid of Bulk modulus 2.5 GPa by 0.01% is

Find the increase in pressure required to decrease the volume of a water sample of 0.01%. Bulk modulus of water =2.1xx10^9Nm^-2 .

The pressure required to reduce the given volume of water by 1% is, (Bulk modulus of water =2xx10^(9)N//m^(2) )

What increases in pressure will be needed to decrease the volume of 1.0 m^(3) of water by 10c.c. ? The bulk modulus of water is 0.21xx10^(10) Nm^(-2)

How much pressure should be applied on a litre of water if it is to be compressed by 0.1%? (Bulk modulus of water= 2100 MPa)

AAKASH INSTITUTE-MECHANICAL PROPERTIES OF SOLIDS-Assignment(Section-C)

A rope 1 cm in diameter breaks, if the tension in it exceeds 500 N. Th...
Text Solution
|
A wire of length L and radius r is fixed at one end. When a stretching...
Text Solution
|
The increase in pressure required to decrease the 200 L volume of a li...
Text Solution
|
Which of the following relations is true?
Text Solution
|
A 5 m long aluminium wire (Y=7xx10^10(N)/(m^2)) of diameter 3 mm suppr...
Text Solution
|
Two steel wires of the same radius have their lengths in the ratio of ...
Text Solution
|
A steal wire of cross-section area 3xx10^(-6) m^(2) can withstand a m...
Text Solution
|
The bulk modulus for an incompresssible liquid is
Text Solution
|
A copper rod length L and radius r is suspended from the ceiling by on...
Text Solution
|
Which of the folliwing substances has the highest elastictiy
Text Solution
|
When a wire of length 10 m is subjected to a force of 100 N along its ...
Text Solution
|
Two wire A and B of length l, radius r and length 2l, radius 2r having...
Text Solution
|
A cube of side 40 cm has its upper face displaced by 0.1 mm by a tange...
Text Solution
|
A rod of length l and radius r is joined to a rod of length l//2 and r...
Text Solution
|
The Young's modulus of the meterial of a wire is 2xx10^(10) N m^(-2) I...
Text Solution
|
A weight is suspended from a long metal wire. If the wire suddenly bre...
Text Solution
|
A wire of natural length l, young's modulus Y and ares of cross-sectio...
Text Solution
|
When a force is applied on a wire of uniform cross-sectional area 3xx1...
Text Solution
|
If in a wire of Young's moduls Y, longitudinal strain X is produced th...
Text Solution
|
A uniform metal rod of 2mm^(2) area of cross section is heated from 0^...
Text Solution
|