When a vernier calliper is used to measure external and internal diameters of an aluminium tube, the observations were made as follow:
For external diameter:
Main scale reading = 2.2 cm
Vernier coinciding division = 4 and
For inner diameter:
Main scale reading = 1.8 cm
Vernier coinciding division = 8

In a vernier callipers, 10 vernier scale divisions coincide with 9MSD each of value 1mm. While measuring length of a cylinder using this calliper, main scale reading is 5.1 cm and 7th vernier division coincides with any main scale division. Whenm diameter of cylinder is measured, main scale reading is 1.7 cm and 3rd vernier division coincides with any main scale division. Calculate curved surface area of the cylinder with correct number of significant figures.

The vernier constant of a vernier callipers is 0.1 mm and it has a positive zero error of 0.04 cm . While measuring diameter of a rod, the main scale reading is 1.2 cm and 5th vernier division is coinciding with any scale division. The correct diameter of the rod is

The jaws of a vernier callipers touch the inner wall of calorimeter without any undue pressure. The position of zero of vernier scale on the main scale reads 3.48. The 6^(th) of vernier scale division is coinciding with any main scale division. Vernier constant of callipers is 0.01 cm. Find actual internal diameter of calorimeter, when it is observed that the vernier scale has a zero error of -0.03cm.

In a vernier callipers having 10 Vsd the vernier constant is 0.1 mm When the jaws are closed zero of varnier lies to the left of zero of main and 7th Vsd coincides with scale division when a cylinder is placed between the jaws the main scale reading was 7.7 cm and vernier scale read 8 division What is the diameter of the cylinder ?

Smallest division on the main scale of given Vernier calipers is 0.5 mm. Vernier scale has 25 divisions and these coincide with 24 main scale divisions. The least count of Vernier callipers is

The main scale of vernier callipers is divided into 0.5mm and its least count is 0.005 cm . Then the number of divisions on vernier scale is

The diameter of a spherical bob is measured using a vernier callipers . 9 divisions of the main scale ,in the vernier callipers ,are equal to 10 divisions of vernier scale .One main scale division is 1 mm . The main scale reading is 10mm and 8th division of vernier scale was found to coincide exactly with one of the main scale division .If the given vernier callipers has positive zero error of 0.04 cm , then the radius of the bob is __________ xx10^(-2) cm.

While measuring the diameter of a sphere with a vernier callipers M.S.R and V.S.D. are 35 mm and 5 respectively . If the vernier scale coinciding with 19 division of main scale what is the diameter of the sphere?