A force of 400 kg. weight can break a wi...

A force of 400 kg. weight can break a wire. The force required to break a wire of double the area of cross-section will be

Topper's Solved these Questions

Mechanical Properties of Solids
SL ARORA|Exercise Example|113 Videos
Mechanical Properties of fluids
SL ARORA|Exercise Exercise|459 Videos
MECHANICS
SL ARORA|Exercise Exercise|341 Videos

Similar Questions

Explore conceptually related problems

A wire can be broken by 400kg.wt . The load required to break the wire of double the thickness of the same material will be (in kgwt .)

The breaking stress for a wire of unit cross-section is called

A wire can be broken by applying a load of 15 kg wt. The force required to break the wire of the same length and material but of twice the diameter of the wire will be

Assertion If radius of cylinderical wire is doubled, then this wire can bear four times stress. Reason By doubling the radius, area of cross-section will become four times.

A wire whose cross-sectional area is 4mm^(2) is streched by 0.1mm by a certain load. If a similar wire of double the area of cross-section is under the same load, then the elongation would be

A wire can be broken by applying a load of 20kg wt. Then the force required to break the wire of twice the diameter and same length, same material, is

A metal wire can be broken by applying a load of 45 kg wt. Then the force required to break the wire of twice the diameter and the same material is

A force F is needed to break a copper wire having radius R. the force needed to break a copper wire of radius 2R will be

A force F is needed to break a copper wire having radius R. The force needed to break a copper wire of same length and radius 2R will be

A Steel wire is 1m long and 1mm^(2) in area of cross-section. If it takes 200N to streach this wire by 1mm , the forces that will be required to stretch the wrie of the same material and cross-sectional area form a length of 10m to 1002cm

SL ARORA-Mechanical Properties of Solids-Example

A force of 400 kg. weight can break a wire. The force required to brea...
Text Solution
|
The length of a suspended loire increases by 10^-4 of its original len...
Text Solution
|
A uniform wire of steel of length 2.5m and density 8.0gcm^(-3) weighs ...
Text Solution
|
A structural steel rod has a radius of 10 mm and a length of 1.0 m. A ...
Text Solution
|
A structural steel rod has a radius of 10 mm and a length of 1.0 m. A ...
Text Solution
|
A structural steel rod has a radius of 10 mm and a length of 1.0 m. A ...
Text Solution
|
What is the percentage increase in length of a wire of diameter 2.5 mm...
Text Solution
|
The breaking stress for a metal is 7.8 xx 10^9 Nm^-2. Calculate the ma...
Text Solution
|
A rubber string 10m long is suspended from a rigid support at its one ...
Text Solution
|
A silica glass rod has a diameter of1cmand is 10 cmlong. The ultimate ...
Text Solution
|
A composite wire of uniform diameter 3.0 mm consisting of a copper wir...
Text Solution
|
The maximum stress that can be applied to the material of a wire used ...
Text Solution
|
A mass of 100 grams is attached to the end of a rubber string 49 cm. l...
Text Solution
|
A uniform heavy rod of weight W, cross sectional area a and length L i...
Text Solution
|
A steel wire of uniform cross-section 1 mm^(2) is heated to 70^(@)C an...
Text Solution
|
The presssure of a medium is changed from 1.01xx10^(5) Pa to 1.165xx...
Text Solution
|
The average depth of indian Ocean is about 3000 m. The fractional comp...
Text Solution
|
A sphere contracts in volume by 0.01% when taken to the bottom of sea ...
Text Solution
|
If the normal density of sea water is 1.00 g//cm^(3), what will be its...
Text Solution
|
A cube is subjected to pressure of 5 xx 10^(5)N//m^(2). Each side of t...
Text Solution
|
Calculate the presure required to stop the increases in volume of a co...
Text Solution
|