A wire elongates by l mm when a load W i...

A wire elongates by l mm when a load W is hanged from it. If the wire goes over a pulley and two weights W each are hung at the two ends, the elongation of the wire will be (in mm)

l`//`2

zero

Text Solution

Verified by Experts

Topper's Solved these Questions

Mechanical Properties of Solids
SL ARORA|Exercise Example|113 Videos
Mechanical Properties of fluids
SL ARORA|Exercise Exercise|459 Videos
MECHANICS
SL ARORA|Exercise Exercise|341 Videos

Similar Questions

Explore conceptually related problems

A wire elongastes by 1.0 mm when a load W ils hung from it. If this wire goes over a pulley and two weights W each are hung at the two ends the elongation of the wire will be

A wire elongates by l units, when a load w is suspended from it . If the wirew gets over a pulley ( equally on both the sides ) and two weights w each are hung at the two ends, the elongation of wire (in units ) will be

When a weight W is hung from one end of a wire of length L (other end being fixed), the length of the wire increases by l . If the same wire is passed over a pulley and two weights W each are hung at the two ends,what will be the total elongation in the wire?

When radius of wire is doubled, the elongation dl of the wire

A wire elongates by 8 mm when a load of 9 kg is suspended from it. What is the elongation when its radius is doubled, if all other quantites are the same as before ?

A wire elongates by 9 mm when a load of 10 kg is suspended from it. What is the elongation when its radius is doubled, if all other quantities are same as before?

A wire extends by 1 mm when a force a applied. Double the force is applied to another wire of some material and length but half the radius of cross-section. The elongation of the wire in mm will be

A body of mass M is attached to the lower end of a metal wire, whose upper end is fixed . The elongation of the wire is l .

When a load W is hung from a wire, it extends by Deltal . The heat produced in the process is

SL ARORA-Mechanical Properties of Solids-Example

A wire elongates by l mm when a load W is hanged from it. If the wire ...
Text Solution
|
The length of a suspended loire increases by 10^-4 of its original len...
Text Solution
|
A uniform wire of steel of length 2.5m and density 8.0gcm^(-3) weighs ...
Text Solution
|
A structural steel rod has a radius of 10 mm and a length of 1.0 m. A ...
Text Solution
|
A structural steel rod has a radius of 10 mm and a length of 1.0 m. A ...
Text Solution
|
A structural steel rod has a radius of 10 mm and a length of 1.0 m. A ...
Text Solution
|
What is the percentage increase in length of a wire of diameter 2.5 mm...
Text Solution
|
The breaking stress for a metal is 7.8 xx 10^9 Nm^-2. Calculate the ma...
Text Solution
|
A rubber string 10m long is suspended from a rigid support at its one ...
Text Solution
|
A silica glass rod has a diameter of1cmand is 10 cmlong. The ultimate ...
Text Solution
|
A composite wire of uniform diameter 3.0 mm consisting of a copper wir...
Text Solution
|
The maximum stress that can be applied to the material of a wire used ...
Text Solution
|
A mass of 100 grams is attached to the end of a rubber string 49 cm. l...
Text Solution
|
A uniform heavy rod of weight W, cross sectional area a and length L i...
Text Solution
|
A steel wire of uniform cross-section 1 mm^(2) is heated to 70^(@)C an...
Text Solution
|
The presssure of a medium is changed from 1.01xx10^(5) Pa to 1.165xx...
Text Solution
|
The average depth of indian Ocean is about 3000 m. The fractional comp...
Text Solution
|
A sphere contracts in volume by 0.01% when taken to the bottom of sea ...
Text Solution
|
If the normal density of sea water is 1.00 g//cm^(3), what will be its...
Text Solution
|
A cube is subjected to pressure of 5 xx 10^(5)N//m^(2). Each side of t...
Text Solution
|
Calculate the presure required to stop the increases in volume of a co...
Text Solution
|