In car lift compressed air exerts a force `F_1` on a small piston having a radius of 5 cm. This pressure is transmitted to a second piston of radius 15 cm. If the mass of the car to be lifted is 1350 kg, what is `F_1 ?` What is the pressure necessary to ac complish this task ?

In a car lift, compressed air exerts a force F_(1) on a small piston having a radius of 0.5 cm . This pressure is transmitted to a second piston of radius 10.0 cm . If the mass of the car to be lifted is 1350 kg. calculate F_(1) . What is the pressure necessary to ac complish this task?

In a vehicle lifter the enclosed gas exerts a force F on a small piston having a diameter of 8 cm. This pressure is transmitted to a second piston of diameter 24 cm. If the mass of the vehicle to be lifted is 1400 kg then value of F is

In a car lift , compressed air with a gauge pressure of 4.0 xx 10^(5) Pa is used to raise a piston with a circular cross-sectional area . If the radius of the piston is 0.17 m , what is the maximum mass that can be raised using this piston ?

If a pressure of 378 atm is exerted on a circular cross section of radius 0.1 mm, what is the force exerted on the area?

Figure shows a hydraulic press which the larger piston of diameter 35 cm at a height of 1.5 m relative to the smaller piston of diameter 10 cm. The mass on the smaller piston is 20 kg. What is the force exerted on the load by the larger piston. The density of oil in the press is 750 kg//m^(3) . Takes g = 9.8 m//s^(2) .

What will be the force required to exert a pressure of 20,000 Pa on an area of 1 cm^2 .

The radius of an air bubble is increasing at the rate of 0.5 cm/sec. At what rate is the volume of the bubble increasing when the radius is 1 cm?

In a hydraulic lift, used at a service station the radius of the large and small piston are in the ration of 20 : 1 . What weight placed on the small piston will be sufficient to lift a car of mass 1500 kg ?