In a hydraulic press used for compressing cotton the area of the piston is `0.1 m^(2)` and the force exerted along the piston rod is `200 N`. If the area of the larger cylinder is `0.8 m^(2)`, find the pressure produced in the cylinder and the total crushing force exerted on the bale of cotton.

In a simple hydraulic press, the cross sectional area of the two cylinders is 5xx10^(-1)m^(2) and 10^(-2)m^(2) respectively. A force of 20 N is applied at the small plunger. a. What is the pressure produced in the cylinders? b. What is the thrust exerted on the large plunger? c. How much work is done by the operator, if the smaller plunger moves down 0.1m ?

The sum of radius of the base and height of a cylinder is 37 m. If the total surface area of the cylinder is 1628 m^(2) , find the curved surface area and volume of the cylinder

A car is lifted by a hydraulic jack that consists of two pistons. The diameter of the larger piston is 2 m and that of the smaller piston is 50 cm. If the force applied on the smaller piston is 240 N, find the weight of the car.

If a pressure of 378 atm is exerted on a circular cross section of radius 0.1 mm, what is the force exerted on the area?

Two pistons of hydraulic press have diameter of 30.0 cm and 2.5 cm , find the force exerted on the longer piston when 50.0kg wt. is placed on smaller piston.

The length of an iron cylinder is 0.8 m and the area of cross sectionis 0.45m^(2) . Find the mass of the cylinder if its density is 7800kg//m^(3) .

The area of the smaller piston of a hydraulic press is 1 cm^(2) and that of larger piston is 22 cm^(2) . How much weight can be raised on the larger piston by a 200 kg f exerted on the smaller piston?