Home
Class 11
PHYSICS
A cylinderical tank 1 m in radius rests ...


A cylinderical tank 1 m in radius rests on a plaform 5 m high. Initially the tank is filled with water upto a height of 5m a plug whose area is `10^(-4)cm^(2)` is removed from an orifice on the side of the tank at the bottom.
Calculate (a). Initial speed with which the water flows from the orifice
(b). Initial speed with which the water strikes the ground.

Text Solution

Verified by Experts

The correct Answer is:
A, B, C, D

(a) `v=sqrt(2gh)=sqrt(2xx10xx5)`
`=10m//s`
(b) From conservation of energy
`v'^(2)=v^(2)+2gh`
`=100+2xx10xx5=200`
`v'^(2)=14.1m//s`
(c ) `t=(2A)/(asqrt(2g))[sqrt(H)-sqrt((H)/(2))]`
`=(2xxpixx(1)^(2))/(10^(-4)sqrt(2xx10))[sqrt(5)-sqrt(2.5)]`
`=9200 s`.
Promotional Banner

Topper's Solved these Questions

  • FLUID MECHANICS

    DC PANDEY ENGLISH|Exercise Example 13.1|1 Videos
  • FLUID MECHANICS

    DC PANDEY ENGLISH|Exercise Example 13.2|1 Videos
  • FLUID MECHANICS

    DC PANDEY ENGLISH|Exercise Level 2 Comprehension Based|7 Videos
  • EXPERIMENTS

    DC PANDEY ENGLISH|Exercise Subjective|15 Videos
  • GENERAL PHYSICS

    DC PANDEY ENGLISH|Exercise INTEGER_TYPE|2 Videos

Similar Questions

Explore conceptually related problems

Calculate the speed with which wafer emerges from a hole in a tank at which the gauge pressure is 3 xx10^(5) N//m^(2) ?

A rectangular tank is placed on a horizontal ground and is filled with water to a height H above the base. A small hole is made on one vertical side at a depth D below the level of the water in the tank. The distance x from the bottom of the tank at which the water jet from the tank will hit the ground is

A water tank is placed on a platform of height 5 m high and there is an orifice near the bottom in the wall of tank at 5 m below the level of water. Find the speed with which water will hit the ground [Take g = 10 m/ s^(2) ]

A cylindrical tank of height 2 m is open at the top and has a radius 50 cm. Water is filled in it upto a height 1.75 m. Calculate how long it will take to empty the tank through a hole of radius 0.05 cm in its bottom.

A tank is filled to a height H. The range of water coming out of a hole which is a depth H//4 from the surface of water level is

The level of water in a tank is 5 m high . A hole of the area 10 cm^2 is made in the bottom of the tank . The rate of leakage of water from the hole is

Water is maintained at a height of 10 min a tank. Calculate the diameter of orifice needed at the base of the tank to discharge water at the rate of 26.4 m^(3) per minute.

A cylindrical vessel of height 500mm has an orifice (small hole) at its bottom. The orifice is initially closed and water is filled in it up to height H. Now the top is completely sealed with a cap and the orifice at the bottom is opened. Some water comes out from the orifice and the water level in the vessel becomes steady with height of water column being 200mm. Find the fall in height(in mm) of water level due to opening of the orifice. [Take atmospheric pressure =1.0xx10^5N//m^2 , density of water=1000kg//m^3 and g=10m//s^2 . Neglect any effect of surface tension.]

A tank 5 m high is half filled with water and then is filled to top with oil of density 0.85 g//cm^3 The pressure at the bottom of the tank, due to these liquids is

A tank of square cross section (2mxx2m) is filled with water up to a height of 2.5 m . Find the thrust experienced by the vertical and botom of the tank (g=10m//s^(2)) .

DC PANDEY ENGLISH-FLUID MECHANICS-Subjective
  1. A cubical block of wood of edge 3 cm floats in water. The lower surfac...

    Text Solution

    |

  2. Figure shown a container having liquid of variable density. The densit...

    Text Solution

    |

  3. A cylinderical tank 1 m in radius rests on a plaform 5 m high. Initial...

    Text Solution

    |

  4. A block of mass m is kept over a fixed smooth wedge. Block is attached...

    Text Solution

    |

  5. A cubic body floats on mercury with 0.25 fraction of its volume below ...

    Text Solution

    |

  6. A siphon tube is discharging a liquid of specific gravity 0.9 from a r...

    Text Solution

    |

  7. A long cylindrical tank of cross-sectional area 0.5m^(2) is filled wit...

    Text Solution

    |

  8. A spring is attached to the bottom of an swimming pool, with the axis ...

    Text Solution

    |

  9. A rectangular tank of height 10m filled with water, is placed near the...

    Text Solution

    |

  10. A ball of density d is dropped on to a horizontal solid surface. It bo...

    Text Solution

    |

  11. There is an air bubble of radius 1.0mm in a liquid of surface tension ...

    Text Solution

    |

  12. A metal sphere of radius 1 mm and mass 50 mg falls vertically in glyce...

    Text Solution

    |

  13. A wire forming a loop is dipped into soap solution and taken out so th...

    Text Solution

    |

  14. A cylindrical vessel is filled with water upto a height of 1m. The cro...

    Text Solution

    |

  15. A tank with a small orifice contains oil on top of water. It is immers...

    Text Solution

    |

  16. What work should be done in order to squeeze all water from a horizont...

    Text Solution

    |

  17. A cylinder is fitted with a piston, beneath which is a spring, as in t...

    Text Solution

    |

  18. A non-viscous liquid of constant density 1000kg//m^3 flows in a stream...

    Text Solution

    |

  19. A glass plate of length 10 cm, breadth 1.54 cm and thickness 0.20 cm w...

    Text Solution

    |

  20. Two narrow bores of diameters 3.0mm and 6.0 mm are joined together to ...

    Text Solution

    |