A p-n junction diode can withstand curre...

A p-n junction diode can withstand current up to 10 mA under forward bias, the diode has a potential drop of 0.5 V across it which is assumed to be independent of current what is the maximum voltage of battery used to forwaed bias the diode when a resistance of `200 Omega` is connected in series with it.

Text Solution

Verified by Experts

2.5V

Topper's Solved these Questions

SEMICONDUCTOR DEVICES
AAKASH SERIES|Exercise Problems (LEVEL-II)|9 Videos
SEMICONDUCTOR DEVICES
AAKASH SERIES|Exercise EXAMPLES|56 Videos
SEMICONDUCTOR DEVICES
AAKASH SERIES|Exercise Exercise (very Short answer questions)|36 Videos
RAY OPTICS
AAKASH SERIES|Exercise PROBLEMS ( LEVEL-II)|60 Videos
UNITS AND MEASUREMENT
AAKASH SERIES|Exercise PRACTICE EXERCISE|45 Videos

Similar Questions

Explore conceptually related problems

A P-N junction diode can withstand currents up to 10 mA . Under forward bias, The diode has a potential drop of 0.5 V across it which is assumed to be independent of current. The maximum voltage of the battery used to forward bias the diode when a resistance of 200 Omega is connected in series with it is

A PN junction diode when forward biased has a drop of 0.5 V which is assumed to be independent of current. The current in excess of 10 mA through the diode produces large joule heating which damages the diode. If we want to use a 1.5V battery to forward bias the diode, the resistor used in series with the diode so that the maximum current does not exceed 5 mA is. .

A diode has potential drop of 0.5 volts in forward bias. The maximumcurrent that can be flow through diode is 10mA.Then find the resistance connected in series with diode so that set up can be connected to a battery of 1.5 volts:

A diode made forward biased by a two volt battery however there is a drop of 0.5 V across the diode which is independent of current. Also a current greater then 10 mA produces large joule loss and damages diode. If diode is to be operated at 5 mA, the series resistance to be put is

In V-I characteristics of a p-n junction diode, why is the current under reverse bias almost independent of the applied potential upto a critical voltage?

In the given circuit the voltage drop across the diode is 0.8 V, if the diode can withstand current upto maximum of 30 mA, then find the maximum voltage of the battery

A light-emitting diode (LED) has a voltage drop of 2V across it and passes a current of 10 muA , when it operates with a 6V battery with a limiting resistor R. what is the value of R ?

When a diode is forward biased, it has a voltage drop of 0.5 V. The safe limit of current through the diode is 10 mA. If a battery of emf 1.5 V is used in the circuit, the value of minimum resistance to be connected in series with the diode so that the current does not exceed the safe limit is :

The diode used at a constant potential drop of 0.5 V at all currents and maximum power rating of 100 mW. What resistance must be connected in series diode, so that current in circuit is maximum?

The diode used in the circuit shown in the figure has a constant voltage drop of 0.5 V at all currents and a maximum power rating fo 100 milliwatts. What should be the value of the resistor R , connected in series with the diode for obtaining maximum current?

AAKASH SERIES-SEMICONDUCTOR DEVICES-Problems (LEVEL-I)

Calculate the current flowing in the circuit below which has two oppos...
Text Solution
|
The circuit shown in figure contains two diodes each with a forward re...
Text Solution
|
A p-n junction diode can withstand current up to 10 mA under forward b...
Text Solution
|
The resistance of the diode in the forward biased condition is 20Omega...
Text Solution
|
Find maximum voltage across AB in the circuit shown in figure. Assume ...
Text Solution
|
The diode used in the circuit shown in the figure has a constant volta...
Text Solution
|
For the circuit shown in Fig. find 1) the output voltage 2) the vo...
Text Solution
|
The applied input AC power to a half wave rectifier is 190W. The DC ou...
Text Solution
|
A p-n diode is used in a half wave rectifier with a load resistance of...
Text Solution
|
A full wave rectifier uses two diodes with a load resistance of 100 O...
Text Solution
|
A full-wave rectifier is used to convert 50 Hz A.C into D.C, then the ...
Text Solution
|
In an N-P-N transistor operating in the active region, the collector c...
Text Solution
|
In a common base configuration, with a base current of 0.005 mA, the e...
Text Solution
|
For a transistor 'alpha' = 0.98 and emitter current I(E) = 2.5 mA. Cal...
Text Solution
|
In common base configuration of a transistor, a change of 200 mV in em...
Text Solution
|
In a transistor the emitter current is 1.01 times as large as the coll...
Text Solution
|
In a transistor circuit the base current changes from 30 muA to 90muA....
Text Solution
|
The constant a of a transistor is 0.9. What would be the change in col...
Text Solution
|
For a transistor, the current gain of common-base configuration is 0.8...
Text Solution
|
The current gain of a transistor in common emitter circuit is 49. Calc...
Text Solution
|