In space charge limited region, the plat...

In space charge limited region, the plate current in a diode is 10 mA for plate voltage 150 V . If the plate voltage is increased to 600 V , then the plate current will be

10 mA

40 mA

80 mA

160 mA

Text Solution

Verified by Experts

The correct Answer is:

Topper's Solved these Questions

ELECTRONICS
ERRORLESS |Exercise Graphical Questions|3 Videos
ELECTRON, PHOTON, PHOTOELECTRIC EFFECT AND X-RAYS
ERRORLESS |Exercise Self Evaluation Test|3 Videos
ELECTROSTATICS
ERRORLESS |Exercise Ordinary Thinking Objective Questions (Electric Flux and Gauss.s Law)|28 Videos

Similar Questions

Explore conceptually related problems

The plate current in a diode is zero. It is possible that

At a plate potential of 150 V the palte current in a diode is 8 mA under space charge limited conditions if the plate potential is changed to 300 V the plate current is

The plate current in a diode is 20 mA when the plate voltage is 50 V or 60 V . What will be the current if the plate voltage is 70 V ?

In a vaccume diode, when the plate voltage is 40 V, the plate current is 10 mA. For a plate voltage of 160 V, the plate current is

The power delivered in the plate circuit of a diode is 1.0 W when the plate voltage is 36 V . Find the power delivered if the plate voltage is increased to 49 V . Assume Langmuir-Child equation to hold .

When the plate voltage of a triode is 150 V, its cut-ff voltage is -5V . On increasing the plate voltate to 200V, the cut-off voltage can be

In an experiment, the saturation in the plate current in a diode is observed at 240 V . But a student still wants to increase the plate current. It can be done, if

The plate resistance and the amplification factor of a triode are 10 kOmega and 20 . The tube is operated at plate voltage 250 V and grid voltage -7.5 V . The plate current is 10 mA . (a) To what value should the grid voltage be changed so as to increase the plate current to 15 mA ? (b) To what value should the plate voltage be changed to take the plate current back to 10 mA ?

ERRORLESS -ELECTRONICS-Selv Evaluation Test

Two identical capacitors A and B are charged to the same potential V a...
Text Solution
|
In transistor, forward bias is always smaller than the reverse bias. T...
Text Solution
|
In NPN transistor, if doping in base region is increased then collecto...
Text Solution
|
In the following circuit I(1) and I(2) are respectively
Text Solution
|
In space charge limited region, the plate current in a diode is 10 mA ...
Text Solution
|
A triode has a plate resistance of 10 k Omega and amplification factor...
Text Solution
|
Pure sodium (Na) is a good conductor of electricity because the 3s and...
Text Solution
|
Would there be any advantage to adding n-type or p-type impurities to ...
Text Solution
|
In the following common emitter circuit if beta=100, V(CE)=7 V, V(BE)=...
Text Solution
|
When a battery is connected to a P-type semiconductor with a metallic ...
Text Solution
|
Is the ionisation energy of an isolated free atom different from the i...
Text Solution
|
In the following circuit, a voltmeter V is connected across a lamp L. ...
Text Solution
|
For given electric voltage signal dc value is
Text Solution
|
When a silicon PN junction is in forwards biased condition with series...
Text Solution
|
In the following circuit the equivalent resistance between A and B is
Text Solution
|
In the following circuit of PN junction diodes D(1),D(2) and D(3) are ...
Text Solution
|
In circuit in following figure the value of Y is-
Text Solution
|
A waveform shown when applied to the following circuit will produce wh...
Text Solution
|
In a triode, cathode, grid and plate are at 0, – 2 and 80 V respective...
Text Solution
|
The energy gap of silicon is 1.5 eV . At what wavelength the silicon w...
Text Solution
|